Re: Program stop
- From: Malke <invalid@xxxxxxxxxxxx>
- Date: Sat, 30 Jul 2005 08:55:29 -0700
Phil wrote:
> In the past few day I've been having programs stop responding in the
> middle
> of my work or when I try to activae it. I wind up sending error
> reports
> after error report to Microsoft or rebooting my system in order to
> get out
> of it. I try ending the program in task manager, but sometimes that
> freezes
> up too. Could someone shed some light as to why and what makes this
> happen. I have not made any major changes to my computer in the last
> few months. Help........frustrated.
>
> Windows/xp home w/service pack2
> Norton Internet Security 2005
What does "programs stop" actually mean? If you mean that everything
locks up and you are sure your computer is 100% malware free (not just
virus-free), then you are probably having hardware failures. Here is a
link to help in checking for malware:
http://www.elephantboycomputers.com/page2.html#Removing_Malware
And here are general hardware troubleshooting steps:
1) Open the computer and run it open, cleaning out all dust bunnies and
observing all fans (overheating will cause system freezing). Obviously
you can't do this with a laptop, but you can hear if the fan is running
and feel if the laptop is getting too hot.
2) Test the RAM - I like Memtest86+ from www.memtest.org. Obviously, you
have to get the program from a working machine. You will either
download the precompiled Windows binary to make a bootable floppy or
the .iso to make a bootable cd. If you want to use the latter, you'll
need to have third-party burning software on the machine where you
download the file - XP's built-in burning capability won't do the job.
In either case, boot with the media you made. The test will run
immediately. Let the test run for an extended period of time - unless
errors are seen immediately. If you get any errors, replace the RAM.
3) Test the hard drive with a diagnostic utility from the mftr. Usually
you will download the file and make a bootable floppy with it. Boot
with the media and do a thorough test. If the drive has physical
errors, replace it.
4) The power supply may be going bad or be inadequate for the devices
you have in the system. The adequacy issue doesn't really apply to a
laptop, although of course the power
supply can be faulty.
5) Test the motherboard with something like TuffTest from
www.tufftest.com. Sometimes this is useful, and sometimes it isn't.
Testing hardware failures often involves swapping out suspected parts
with known-good parts. If you can't do the testing yourself and/or are
uncomfortable opening your computer, take the machine to a professional
computer repair shop (not your local equivalent of BigStoreUSA).
Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
.
- References:
- Program stop
- From: Phil
- Program stop
- Prev by Date: Re: Locking wallpaper, etc
- Next by Date: mass renaming
- Previous by thread: Program stop
- Next by thread: Re: problem
- Index(es):
Relevant Pages
|
