Re: netsh !! Please help

No modem has ever reached 56K baud rate (it is just too fast for the phone
line. At best, you can get 42K baud rate is the most likely baud rate you
will get. Even this baud rate is "flaky" at times. This is one reason that
"boardband" DSL service is taking off.


"who_cares" <whocares@xxxxxxxxxxxxxx> wrote in message
news:3z7Ge.65369$oJ.9712@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> Sorry, perhaps I used an incorrect term.
>
> The connection on the modem is 24pin and the connection to the PC is a
> 9pin.
>
>
> "Yves Leclerc" <yleclercNOSPAM@xxxxxxxxxx> wrote in message
> news:OlFWng3kFHA.3568@xxxxxxxxxxxxxxxxxxxxxxx
>>
>> Also, you can not connect a parallel port to serial. These two ports are
>> serial. The one on the modem is a 25 pin serial (known as a DB-25) and
>> the one at the computer is a 9 pin (DB-9).
>>
>>
>> "who_cares" <whocares@xxxxxxxxxxxxxx> wrote in message
>> news:dR%Fe.64912$oJ.47493@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>>
>>> The PC has 512 MB RAM, 80 Gig HD, Pentium 4 3.0 CPU & Windows XP SP2.
>>>
>>> He is using a dialup modem (parallel port on modem to Serial Port on PC)
>>> and the modem completes the handshake & accepts the connection.
>>>
>>> However, all Internet sending & receiving is sooooo slow (14 minutes to
>>> load the Google homepage).
>>>
>>> The ISP has instructed that the following command should be entered at
>>> the root command prompt:
>>>
>>> c:>netsh int ip reset resetlog.txt
>>>
>>> However, even this command is not enabling a 56k modem connection to the
>>> Internet.
>>>
>>> Any helpful suggestions would be appreciated.
>>>
>>> TIA
>>>
>>>
>>
>>
>>
>
>
>


.

Relevant Pages

  • RE: Dialin problem
    ... # /etc/ppp/ppp.conf File for dial out modem to ISP and Dial in modem ... # connection to this FBSD system. ... # it's default options profile set to, NO command echo ATE0 and NO ... Edit /etc/ttys to enable a getty on the port where the dialin ...
    (freebsd-questions)
  • RE: PPP Dial-in Server NOW WORKS
    ... I discovered the necessary modem commands on the mailing lists while ... > dial in service to my FBSD box. ... in the USA the fastest line connection you ... > # ppp command that starts the ppp task to dial the ISP. ...
    (freebsd-questions)
  • Re: I am sick of windows firewall
    ... Yes I noted from another post that you have a dsl modem. ... allow me to download anymore, I switch my modem off/ on to ... I gave ipconfig/all in that command prompt ... Ethernet adapter Local Area Connection: ...
    (comp.security.firewalls)
  • Re: ip address
    ... you might have to power the modem off and on, ... "nass" wrote: ... does it say "Connected" under Local Area Connection? ... CMD.exe click and on the Prompt command type: ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: netsh !! Please help
    ... The connection on the modem is 24pin and the connection to the PC is a 9pin. ... >> He is using a dialup modem (parallel port on modem to Serial Port on PC) ... >> The ISP has instructed that the following command should be entered at ...
    (microsoft.public.windowsxp.general)