RE: lsass Boot Error

I reset the BIOS to the default values. It appears that the Windows XP
CD-ROM that I have isn't bootable. I think its just the program that allows
for the installation of Windows XP. How can I create a boot CD? Or do you
have any other ideas on what I can do?
I really appreciate the help, but am beginning to wonder if I'm going to be
able to salvage the laptop?

"Jonybrv" wrote:

> Bigj, try resetting BIOS to its default values either within BIOS or using
> the RTC battery. Your product documentation should have the instructions
> --
> JonyBrv
>
>
> "bigj" wrote:
>
> > I pressed F2 and put CD-ROM at the top of the list for booting order. You
> > can hear and feel the CD-ROM spinning and the light on CD-ROM works, but then
> > goes off and seems to boot from the hard drive. Not sure what to do now.
> >
> >
> >
> > "Jonybrv" wrote:
> >
> > > Seems the Windows XP LSASS service is corrupted. This is should not stop you
> > > from booting a Windows XP CD. Make sure, you set the boot order for CD-ROM is
> > > set in the BIOS and then try again.
> > >
> > > Hope it helps.
> > >
> > >
> > > --
> > > JonyBrv
> > >
> > >
> > > "bigj" wrote:
> > >
> > > > I have a laptop that gets a lsass.exe error on start up: "An invalid
> > > > parameter was passed to a service or function." I have tried to start in the
> > > > "safe mode" to no avail. I have tried to use the Windows XP cd to boot up
> > > > the system.. no go. I have tried to use a disk that should let me log on and
> > > > perform a stinger virus scan, again no luck. I'm unable to log onto the
> > > > laptop to perform anykind of scan, or anything.
> > > >
> > > > Is there anyone out there that can help me with this problem?
> > > >
.

Relevant Pages

  • RE: Windows XP Setup Restarts the Setup Program When Computer Restarts
    ... > I have totally erased my hard drive and am trying to reinstall Windows XP Pro. ... > Windows XP Setup Restarts the Setup Program When Computer Restarts during ... > installation CD-ROM, ... > This behavior occurs because your computer BIOS sends the message "press any ...
    (microsoft.public.windowsxp.general)
  • Re: I need Help. "No Safe Mode" and...? Possibly an opportunity to recover.
    ... "For someone who knows what they're doing, changing the bios to boot from ... but clear instructions are in the MSKB or link I give them ... Also having experienced the boot to windows problem early on as a beginner, ... Anyone can think of dozens of hardware related reasons why someone can't get ...
    (microsoft.public.windowsxp.basics)
  • Re: CD-ROM & Floppy Drives Dont Work
    ... many things that could well have been done to a W98 [any ... W98 Windows Explorer in either ... Find out if the 6 year old knows how to get into the BIOS, ... See if it will boot from the CD. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Uninstall a pre-installed, non-active XP and revert to 2000 or WIN95
    ... change the setup to have the first bootable device be the CD-ROM? ... when you were there - did your computer recognize the CD-ROM? ... you have not changed your BIOS properly. ... setup routine on your bootable Windows 2000 CD. ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: more blue screen misery
    ... Bios doesnt seem to indicate any problems. ... Safemode stops after this driver is shown on the screen -- AGP440.sys ... A description of the Safe Mode Boot options in Windows XP ...
    (microsoft.public.windowsxp.help_and_support)