RE: lsass Boot Error



I pressed F2 and put CD-ROM at the top of the list for booting order. You
can hear and feel the CD-ROM spinning and the light on CD-ROM works, but then
goes off and seems to boot from the hard drive. Not sure what to do now.



"Jonybrv" wrote:

> Seems the Windows XP LSASS service is corrupted. This is should not stop you
> from booting a Windows XP CD. Make sure, you set the boot order for CD-ROM is
> set in the BIOS and then try again.
>
> Hope it helps.
>
>
> --
> JonyBrv
>
>
> "bigj" wrote:
>
> > I have a laptop that gets a lsass.exe error on start up: "An invalid
> > parameter was passed to a service or function." I have tried to start in the
> > "safe mode" to no avail. I have tried to use the Windows XP cd to boot up
> > the system.. no go. I have tried to use a disk that should let me log on and
> > perform a stinger virus scan, again no luck. I'm unable to log onto the
> > laptop to perform anykind of scan, or anything.
> >
> > Is there anyone out there that can help me with this problem?
> >
.



Relevant Pages

  • RE: lsass Boot Error
    ... can't get it to boot from the CD-ROM. ... Can you walk me through making sure it will boot from the CD-ROM. ... > Seems the Windows XP LSASS service is corrupted. ...
    (microsoft.public.windowsxp.general)
  • RE: System HANGS whenever i play game?
    ... Troubleshooting CD-ROM Problems in Windows 2000 and Windows NT ... If you use a SCSI CD-ROM drive, make sure the SCSI controller is listed on ... Some SCSI-1 CD-ROM drives require the ...
    (microsoft.public.win2000.general)
  • RE: Longhorn Transformation Pack
    ... > starting Windows I was presented with the ntoskrnl failed to load error. ... > Luckily I had an RC of x64 on the machine so I could boot that to check out ... > 1) Insert the Windows XP CD that came with your computer into your CD-ROM ... > 2) Either turn on or reboot your machine. ...
    (microsoft.public.windowsxp.general)
  • RE: Entry Point not Found
    ... Reading through newsgroup I found similar error messages relating to the SBS ... dynamic link library msvcrt.dll on one windows 2000 sp4 client. ... Microsoft Windows 2000 File Protection replaces the missing version of the ... Insert your Windows 2000 CD-ROM into the computer's CD-ROM drive or ...
    (microsoft.public.windows.server.sbs)
  • Re: HELP! CONTINOUS REBOOT AFTER UN-INSTALLING SP3
    ... If your Windows is preinstalled when you bought your PC, ... Windows CD-ROM should have been part of the package. ... Then type EXIT to reboot the PC and boot into your harddisk (not your ...
    (microsoft.public.windowsxp.general)