Re: SCSI vs SATA

From: "R. McCarty" <PcEngWork-NoSpam_@xxxxxxxxxxxxxx>

| After years of using primarily SCSI drives, I finally decided to move on
| to more modern technology. I had been using Ultra-160 SCSI drives on
| an Adaptec 19160 controller. Unfortunately, over the past month or so
| I have had two Seagate SCSI Cheetah drives to go bad on me.
| My Intel motherboard has two SATA controllers, so I checked around
| for some inexpensive SATA drives. Our local Tiger Direct Outlet was
| offering some Hitachi 40.0 Gigabyte drives for under $50.00. Just 7200
| RPM with an 8-Meg cache. Spec's for the drive had access time at 9.0
| mSec and average throughput at 61.0 Megabytes per second.
| Decided to test out SATA and re-configure my PC for probably the 100+
| time. Imaged all the partitions to a "Tray" IDE drive, for quick cut-over.
| Replaced 3-SCSI's with two Hitachi 7K250's and replicated the images
| back to the SATAs.
|
| Overall, I must say I'm impressed. Both SATA drives are delivering an
| average throughput of 59.3 Megabytes a second. The access time is a
| bit poor at 16.9 mS (Compared to 8.6 with SCSI). However, at 7200
| verses 10,000 & 15,000 RPM the SATA keep up pretty well. The point
| of this post is just to illustrate how you can get into a mindset that only
| a
| certain technology will meet your needs. Will I miss the SCSI access times,
| probably. What I won't miss is the $250+ price on a Ultra 160/320 disk.
| Or for that matter, the acoustic whine of those 10-15K RPM drives.My
| PC now sounds like it's off, I can only hear the front intake fan. From a
| thermal standpoint, there isn't much difference. The case temp is staying
| right at 109 F. One thing that's nice, is the SATA drives report their temp
| to Everest, where the SCSI drives didn't.
|
| So far I can't really tell much difference in overall performance, a few
| things "lag" a little bit compared to the SCSI setup. Anyway, thought I'd
| take a few minutes to post up the results.
|

So basically the SATA are on par with Ultra 160. I use Ultra 160 and was interested in
throughput on SATA. Thanx for the info. It is obvious that SATA is less expensive than
SCSI. Most of my devices are SCI (Tape, CD, CDR, CDRW and hard disks) I was dismayed at the
fact I couldn't find a DVDRW SCSI drive. I did get a HP 420i and generally pleased with it
and it is the "only" IDE device on my main system.

I appreciate your posted results.

--
Dave
http://www.claymania.com/removal-trojan-adware.html
http://www.ik-cs.com/got-a-virus.htm


.

Relevant Pages

  • Re: SCSI or SATA
    ... > Can someone tell me what means the expression "...perform like dogs"? ... >> SCSI and SATA, the rotational speed of the drives and support of Native ... >> above quote very similar MTBF figures to SCSI drives, ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: SATA & SCSI
    ... did I just lock myself out from using any scsi drives? ... disk as /dev/sda and an SATA hard disk driven via the libata drivers as ... Build your boot device's support into your kernel and load the other ...
    (comp.os.linux)
  • RE: SCSI vs SATA
    ... I think of SATA as the cheap SCSI. ... The drives are fast, ... The main advantage of the SCSI drives is the ... Spec's for the drive had access time at 9.0 ...
    (microsoft.public.windowsxp.general)
  • SCSI vs SATA
    ... After years of using primarily SCSI drives, I finally decided to move on ... for some inexpensive SATA drives. ... Spec's for the drive had access time at 9.0 ...
    (microsoft.public.windowsxp.general)
  • Re: Loss of SCSI boot after CMOS battery replacement
    ... Where did you find that in the Adaptec BIOS. ... No logical SCSI drives ... resistors back on the controller board... ...
    (comp.periphs.scsi)