Re: 3 mode floppy discs

Barry wrote:
|| Running Dell D600 laptop with a Dell supplied USB FDD. For work I
|| need to access 1.2 Mb FD does XP support this? I know the Fdd needs
|| to be upgraded but I dont want to spend money if the software wont
|| work any way.
||
||
|| cheers

Try this (long!)

Microsoft KB 309623 says WinXP supports only 1.44MB disk format. 3-mode
FD's
capable of reading/writing 720KB, 1.2MB and 1.44MB require special driver
support and support for this feature is not included in Windows XP. See
following:

http://support.microsoft.com/default.aspx?scid=kb;en-us;309623

Driver link (this is a download only):

http://downloads.viaarena.com/WinXPE/Oct02/XPe_3mflp132_v10.zip

Instructions :

1. Download driver from above link.

2. Unzip the driver - extract the file to a folder.

3. Open Windows XP's Device Manager, expand the "Floppy disk controllers"
heading, and double-click the listing for "Standard floppy disk controller."

4. Click the "Driver" tab, then click the "Update Driver" button.

5. Select the "Install from a list or specific location" radio button and
click the "Next" button.

6. Select the"Don't search. I will choose the driver to install." radio
button and click the "Next" button.

7. Click the"Have Disk" button; then, click the"Browse" button. Browse to
the location that you extracted the files to in Step 2 and double-click the
"VIA3MFPY.INF" file. The, click the"OK" button.

8. You should now have "VIA 3-mode floppy controller" highlighted in the
drivers list. Click the "Next" button to begin the driver file copy. Once
the file copy is complete, your floppy disk drive will access 3 times
(checking all 3 "modes"). This is normal. Click the "Finish" button when the
driver installation is complete.

9a. You may, or may not , have a device labeled "Unknown Device" in
the"Other Devices" heading in Device Manager. If so, continue with step 9a.
If not, skip to step 9b. If you have a device labeled "Unknown Device" in
the "Other Devices" heading in Device Manager, right-click on it and select
"Update Driver." Follow steps 5 through 8 to complete the installation of
"Floppy disk drive" (note that the naming of the driver in the drivers list
in step 8 may be different during this step - this is normal). Once you've
click the "Finish" button, continue on to step 10.

9b. If you do not have a device labeled "Unknown Device" in the "Other
Devices" heading in Device Manager, expand the "Floppy disk drives" heading
in Device Manager and double-click the listing for "floppy disk drive."
Follow steps 4 through 8 to complete the installation of "Floppy disk drive"
(note that the naming of the driver in the drivers list in step 8 may be
different during this step - this is normal). Once you've clicked the
"finish" button, continue on to step 10.

10. Reboot your PC. This should let you know if all of your hard work
REALLY paid off. Check the Device Manager one last time to be sure that you
now have the"VIA 3-mode floppy controller listed under the "Floppy disk
controllers" heading. Put a file on a floppy in Win98 (or another non-SP OS)
and you should now be able to access it in Windows XP (and vice-versa)
without issue. You made it!

HTH!
--
Gordon Burgess-Parker
Interim Systems and Management Accounting
www.gbpcomputing.co.uk


.