RE: IEEE1394 Problem

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: mattpeyton (mattpeyton_at_discussions.microsoft.com)
Date: 01/30/05


Date: Sun, 30 Jan 2005 14:21:06 -0800

Ralph,

Strangely enough, this patch solved my issue. I have had a recurring issue
with loading and removing a firewire compact flash card. When I put the card
in, and then eject it, I lose all my firewire drives. I start to throw
Delayed Write errors. This patch seemed to cure it.

"Ralph Tomaccio" wrote:

> Ever since upgrading to SP2 on my Sony laptop, whenever I connect my high-end
> digital camera to an Adaptec FireConnect IEEE 1394 PC Card, the software for
> the camera does not recogize that the camera is connected.
>
> When I go into Device Manager, there is a yellow exclamation mark next to
> the driver. I then have to uninstall the driver, restart and reinstall the
> driver with the camera connected. Everything works fine until I 1) disconnect
> and reconnect the camera for whatever reason or 2) shut down and restart the
> computer. Either way, even with the card and camera connected, I must again
> go through uninstalling and reinstalling the driver steps and restarting -
> everytime!
>
> I noticed there was an IEEE1394 patch locatied at:
>
> http://www.microsoft.com/downloads/details.aspx?FamilyID=5c076e4c-aec8-434d-9849-e668a50e6e81&DisplayLang=en
>
> It is supposed to correct some IEEE capture device issues. I downloaded and
> installed it, but it didn't make a darn bit of difference. The funny thing is
> that I use this same camera and software on a Dell tower and do not
> experience this problem at all. Only on the Sony laptop.
>
> Does anyone know how to fix this problem?



Relevant Pages

  • Re: Re: AOL Photocam Plus Digital Camera DC-620?
    ... I found no mention of a CF card in the pdf file. ... The camera 'menu' ... The Win2K driver for the camera, mentions "TWAIN", but I don't understand ...
    (microsoft.public.windowsxp.hardware)
  • Re: Importing Pictures from Canon g9
    ... After trawling through a lot of other posts, I did go out and buy a card ... reader on new years eve, and it worked like a charm. ... driver for this camera as it's meant to "plug and play" in XP. ... The camera is not recognised by windows XP. ...
    (microsoft.public.windowsxp.photos)
  • Re: Secure Digital Card Error "Disk in Drive Is Not Formatted"
    ... > This particular machine has an SD card reader built ... > unreadable by the camera. ... > driver information is identical to that on my T42 laptop. ... Oddly the camera does fine with a new disk, ...
    (microsoft.public.windowsxp.hardware)
  • Re: forcing re driver to a card
    ... I think these should be supported by the re driver, ... -Can the source of the re driver be changed so it recognizes the card ... The answer to your first question is: patch the source so it recognizes the ... without recompiling anything, but recompiling isn't really too bad once you ...
    (freebsd-questions)
  • Witing a USB driver...
    ... USB port for accessing the on-board SD card. ... The vendor id/product id combo is not recognized. ... it to the usb-storage driver, but, though the module loads the driver, it ... never seems to bind the camera as a storage device (no entry in /proc/scsi, ...
    (comp.os.linux.development.system)