Re: Retrieve Data from Laptop HD

From: kurttrail (dontemailme_at_anywhereintheknowuniverse.org)
Date: 02/27/05


Date: Sun, 27 Feb 2005 13:15:39 -0500

Doug wrote:
> My laptop (Toshiba Tecra M2) died and I am trying to retrieve data
> from the HD. I purchsed a 2.5" Disk enclosure with USB 2.0
> connector, that is supposed to be supported by XP HE that I am
> running on another laptop. When I connect, I get an error on the USB
> device, the device cannot start (code 10).
>
> Can anyone suggest some steps to get the drive connected? I am
> going to use the drive in a new laptop (identical model), so I do not
> want to reformat.
>
> lndougstevens

Did you install the drivers that came with the Disk enclosure?

-- 
Peace!
Kurt
Self-anointed Moderator
microscum.pubic.windowsexp.gonorrhea
http://microscum.com/mscommunity
"Trustworthy Computing" is only another example of an Oxymoron!
"Produkt-Aktivierung macht frei" 


Relevant Pages

  • Re: Free Muni or other hotspot access from a sailboat??
    ... you'll always have a strong signal on your boat, ... laptop individually, via URL IP address, connecting them with a crossover ... i'm going to use an old laptop running debian linux as my router on the ... connector for boat hard wire connections, ...
    (rec.boats.cruising)
  • Re: problem with Dell laptop
    ... I'm certain it's the correct adaptor for that model of laptop but it just stays on battery power when connected to the mains, ... I'm thinking that maybe it's taken a knock and something is busted inside, like where the power socket connects to the motherboard. ... Re-seating the connector flush with the motherboard with some additional physical support such as Araldite or hot melt glue. ... If mangled you need to remove the mangled bits, remove a few mm of coating from the ends of the remaining tracks on the motherboard and solder some link wires from these points to the contacts on the power connector, taking care not to heat the tracks for too long or more will lift off. ...
    (uk.comp.homebuilt)
  • Re: Capture RS232 Data
    ... The printer connects to a multi-pin socket that looks like a COM port. ... The connector is called a DB25 connector. ... A modem internally control the clocking, checking the status of the equipment and switches the pins that data is transmitted and received on. ... You MAY be able to connect the laptop to the cable that is connected to the printer. ...
    (microsoft.public.access.externaldata)
  • Re: Long-lived "lap"-top?
    ... Laptop power cords usually get bent, twisted, and otherwise fall to ... hinge breaks off. ... I added duct tape over the video connector. ...
    (comp.sys.laptops)
  • Re: I wonder if the following is possible and how do I go about it?
    ... If you use ICS the IP address of the network adapter connected to the other ... This means the other machine is on 192.168.0.something and ICS will allocate ... > Windows ME on a Time 8375 Laptop ... > also a built-in RJ45 connector. ...
    (microsoft.public.win2000.networking)