XP stopped seeing memory flash stick
Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance
Date: Sun, 6 Feb 2005 12:16:38 -0800
Recover the data on the W2k then format the stick. It
should work, sticks act just like hard drives and
occasionally they will become unreadible
>-----Original Message-----
>My XP installation suddenly stopped seeing memory flash
stick.
>It does not require a driver. The stick light is on, but
it does not show up
>in Windows Explorer.
>
>When I run installation of new hardware it does not see
any new hardware.
>
>The stick and the USB post are OK as they work fine when
I boot into w2k on
>the same machine.
>
>What might be a problem?
>
>
>.
>
Relevant Pages
- Re: Plug and play issue with Western Digital WD200
... but is it possible to get non-searialized hard drives? ... For installation to have effect PnP must restart current HDD driver. ... > Depending on hardware type and serial numbers of that hardware you might ...
(microsoft.public.windowsxp.embedded) - Re: REFORMAT/REINSTALL with new motherboard?
... when I do will I have to do a completer reformat or reinstall with any of my hard drives either my master or my slave? ... perform a repair installation of the OS, which will affect only the system partition on the master drive. ... WinXP, like Win2K before it, is not nearly as "promiscuous" as Win9x when it comes to accepting any old hardware configuration you throw at it. ...
(microsoft.public.windowsxp.help_and_support) - Re: WinXP Hang-up
... >> Problems with installation are usually due to hardware issues. ... >> computer model, CPU, RAM amounts, hard drives and how they are ... Make sure you check for an updated BIOS. ...
(microsoft.public.windowsxp.general) - Re: Transfer Hard Drive from one PC to another (upgrade)
... Luckily I have a few extra hard drives around so I was able to test the new box with a fresh install of XP Pro so I know it works, but how can I transfer the drive to the new unit? ... WinXP, like Win2K before it, is not nearly as "promiscuous" as Win9x when it comes to accepting any old hardware configuration you throw at it. ... On installation it "tailors" itself to the specific hardware found. ...
(microsoft.public.windowsxp.help_and_support) - Re: [SLE] Cannot upgrade to 9.2
... > SCSI card, modem card and one of the two CD drives from my computer in ... end up changing out an uncooperative piece of hardware. ... successes involving a current kernel on this motherboard and/or SCSI ... Are there any comments in the release notes or installation ...
(SuSE) |
|
