Re: blank screen with blinking cursor - NO BOOT

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

zaphod314_at_yahoo.com
Date: 01/07/05


Date: 7 Jan 2005 04:45:10 -0800

i tried your suggestion: disconnecting all ide drives and booting from
floppy. still no go :-(



Relevant Pages

  • Re: Cloned but FUBAR, help!!!
    ... that suggested, disconnecting the old drive, booting from the ... W98 floppy and using "fdisk /mbr". ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: screen before windows is not shown
    ... I did not change any settings in the bios. ... Try disconnecting the hard drive and booting to a ... floppy. ... try booting from the hard drive again. ...
    (microsoft.public.windowsxp.general)
  • Re: Multi-boot from USB?
    ... >> So it is not 'booting' it. ... > result the PC is running the copy of MS-DOS which is on the floppy (and ... > using FDD emulation. ... > resides in the bootblock, not in the MBR), by the way. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: repairing win xp after power loss?
    ... try booting the PC with a plain old DOS boot floppy. ... wrong with the BIOS setup for booting from CD. ...
    (microsoft.public.windowsxp.basics)
  • Re: install
    ... to boot from a 3.5 floppy. ... Would hard drive booting work in this case? ... Installation Manual section before as this interests me but couldn't ... The OP asked for floppy boot install, the simplest method ever, and now you ...
    (Debian-User)