RE: Problem with DI-624 router

From: Firouz (Firouz_at_discussions.microsoft.com)
Date: 01/15/05 

Date: Sat, 15 Jan 2005 08:11:02 -0800

Hi Richie,
When I go back to direct connect to Cable, it works with no problems.
Probably I have to change the unit or go to another router provider.
Thanks so much,
Firouz

"Richie NY" wrote:

> Oddly the only thing I can come up with is ayou may have
> early signs of wiring issues from your cable ISP. Signals
> dropping in and out like that usually indicate bad cable
> connections outside the home, rain and windy conditions
> which have damaged the lines.
>
> Had you gone back to a direct connect to the cable modem
> without the router? Try that and if the signal continues
> to frop out bad wiring is what you are most likely
> looking at. Odd that things like happen when we do
> something new like add a router.
>
> Lastly your router could be defective, that's always
> possible, not everything new is perfect.
>
>
> >-----Original Message-----
> >I have bought about a D-Link DWL-925 package that
> contains a DI-624 wireless
> >router and DWL-G650 cardbus adapter.
> >I followed all the installation guidlines and everyhing
> was fine for
> >probably only an hour or so when I saw that my internet
> connection started to
> >go on and off evey five minutes. And this on the hard
> wired PC and not the
> >Laptop!
> >It seems strange that cable coming out from the modem,
> going into router
> >and then into the PC, can not afford a contineous
> connection.
> >The disconnect is only for 1-2 seconds and it reconnects
> automatically.
> >But it causues my MSN Messenger and Yahoo messenger to
> restast every five
> >minutes as they also disconnect and reconncet.
> > I have called D-Link Tech support so many times and
> each guy asks me to
> >change this and that but nothing changes, all the same
> issue.
> >I have Widows XP Home Edition SP2, Intel Pentium 4 ,
> 2.00GHz with 512MB RAM.
> >None of these guys seem to know how to resolve this
> issue, why my connection
> >stops and starts so often.
> >
> >I have done "Ping","IPconfig", "Tracert",.... and non
> shows any issue but
> >the reality is that my connection goes on and off.
> >I have also used reset botton on the router, still
> nothing
> >changes.............
> >Could anybody kindly give me some advice?
> >
> >Best Regards,
> >
> >Firouz
> >
> >.
> >
>

Relevant Pages

  • Re: Restarting Cable Modem Problems
    ... the connection showing as limited or no connectivity. ... So it must be the Cable modem, NTL had the cheek last time to tell me to ... Have NTL Cable Modem. ... Add-on Wireless Router + wired network + two hubs. ...
    (uk.telecom.broadband)
  • Re: Sporadic Cable Modem Connection Drops Seemingly Caused By High Traffic
    ... well to make sure it isn't the router do a direct connect to your pc. ... just a connection problems with the wiring from you modem to the pole. ... The last thing of course is the cable modem and the only way to check ... but usually after 2 or 3 consecutive pings ...
    (comp.dcom.modems.cable)
  • Re: Broadband advice please
    ... >Connection, which is what I was trying to explain - cos Troy's Human ... >had only been used to using his own Cable Modem Connection ... >Connection, also with a Router, which BTW happens to be a WiFi one, ... >BTW - is the WiFi thing in that PC a PCI Card? ...
    (uk.people.silversurfers)
  • Re: cable modem and ISA 2004
    ... With cable config using cable modem Motorola SBV5222 a router must ... From ethernet port of cable modem I ... observed logging at ISA 2004 and connection is opened and closed at port 53. ... I'd concentrate first on ensuring that you can connect to the internet on your server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... by CEICW for any type of connection other than full time broadband was ... exists - is completely transparent to the SBS. ... "local router with an IP address" is the setup that matches her network. ... between the server and my cable modem. ...
    (microsoft.public.windows.server.sbs)