Re: burning cd/dvd
From: Don (Don_at_discussions.microsoft.com)
Date: 12/07/04
- Next message: schiller: "RE: EventID 1003 System Error, poss RAM? Prob with WMD tool?"
- Previous message: R. C. White: "Re: Icons/Text Disaapear"
- In reply to: Harry Ohrn: "Re: burning cd/dvd"
- Next in thread: Harry Ohrn: "Re: burning cd/dvd"
- Reply: Harry Ohrn: "Re: burning cd/dvd"
- Reply: » mrtee «: "Re: burning cd/dvd"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 7 Dec 2004 10:23:03 -0800
DMA is enabled intel accelarator installed - regedit bit that you quoted -
and as I said Nero has no problem at any time recognizing or using either
burner windows on the other hand has a problem with recognition - M/P 10 quit
recognizing the rw/drives first shortly after installing M/P connect - the
support site faq said the M/P would not recognize 2 burners on the same ide
so I put 1 on each - compatabilty site had a firmware upgrade for one burner
- installed it as per instr. still not recognized by windows - cables are
good - I might think it was something like that except for the fact that Nero
has no problem ???
Don
"Harry Ohrn" wrote:
> I'm not certain which "regedit bit" you are referring to so check the
> Problem's section at Alex Nichol's site http://www.aumha.org/a/xpcd.htm and
> the info here in the MS Knowledge base
> http://support.microsoft.com/?kbid=324129
>
> Also do you have DMA enabled for the controller that your devices are on?
> See here http://www.blackmaxpc.com/Guides/Enable_DMA.htm . If you have an
> intel motherboard you may find that installing the intel accelerator (if
> your board is listed) from www.intel.com can help.
>
> As an aside the fact that your devices are being "lost" and then are being
> recognized periodically suggests more than software problems. Have you
> checked to ensure they are properly connected inside the case. While rare it
> is possible for connections to become loose. Other problems could be related
> to failing drive(s) or motherboard problems.
>
> --
>
> Harry Ohrn MS-MVP [Shell/User]
> www.webtree.ca/windowsxp
>
>
> "Don" <Don@discussions.microsoft.com> wrote in message
> news:51BCD4FD-00C3-4A8A-824F-595EA0536584@microsoft.com...
> | Recently M/P 10 and XP/SP2 have both ceased to recognize the rw/drives on
> the
> | system - have uninstalled rebooted and let the wiz reinstall - nothing ,
> have
> | done the regedit bit as suggested in the help file - windows might
> recognizes
> | 1 drive as recordable for a bit - M/P 10 says there are no rw/drives -
> have a
> | cd/rw and a dvd/rw on separate ides - Nero has no problem recognizing or
> | burning anything I want to burn - it is just a pain to have the system and
> | M/P not recognize them ! Have also checked the system compatability web
> site
> | all are good - had an upgrade for one of the burners but it has not
> changed
> | anything?
>
>
>
- Next message: schiller: "RE: EventID 1003 System Error, poss RAM? Prob with WMD tool?"
- Previous message: R. C. White: "Re: Icons/Text Disaapear"
- In reply to: Harry Ohrn: "Re: burning cd/dvd"
- Next in thread: Harry Ohrn: "Re: burning cd/dvd"
- Reply: Harry Ohrn: "Re: burning cd/dvd"
- Reply: » mrtee «: "Re: burning cd/dvd"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
