Re: STOP 0x0000007E Error on installing Service Pack 2
From: Puffin2000 (anonymous_at_discussions.microsoft.com)
Date: 08/26/04
- Next message: Alex Nichol: "Re: WinXP SP2 Pro: Page File"
- Previous message: Alex Nichol: "Re: Beta SP2 and slipstreamed disk"
- In reply to: Will Denny: "Re: STOP 0x0000007E Error on installing Service Pack 2"
- Messages sorted by: [ date ] [ thread ]
Date: Thu, 26 Aug 2004 04:32:15 -0700
Will,
Thanks for your help. I've had a look at that web site
(which is really good by the way) but it does not point me
to any new articles. I'll study them again to see if I've
missed a trick.
I'll have a go at what I carried out previously again to
see if I've missed something but I can't believe I'm the
only one with the problem. Someone may even have fixed
it ;-)
Puffin
>-----Original Message-----
>Hi
>
>Try the following link to Jim Eshelman's web site:
>
>http://aumha.org/win5/kbestop.htm
>
>--
>
>Will Denny
>MVP - Windows Shell/User
>Please reply to the News Groups
>
>
>"Puffin2000" <puffin2000@discussions.microsoft.com> wrote
in message
>news:A6589A39-355D-4662-9A4D-8221FC75DC2A@microsoft.com...
>>I have a system (details below) which has been working
well with Windows XP
>> SP 1 with all critical updates applied. After
installing SP2 I receive the
>> following BSOD error STOP 0x0000007E
>> (0xC0000005,0xF7720750,0xF7902F430,0xF792F12C) . This
error occurs after
>> the
>> "Black" windows splash screen whilst the Blue progress
bar is active.
>>
>>
>> Has anyone else experienced this problem?
>> Does anyone know any techniques which could show the
item in the boot
>> sequence which fails to work? - It appears to be before
the bootlog file
>> kicks in! - See below
>>
>>
>>
>>
>> FURTHER DETAILS
>>
>> The system I have is as follows
>> AMD Athlon 3400+
>> ASUS K8V SE Deluxe Motherboard
>> SATA Raid drives (500Gb) on WinXP Promise FastTrak 378
(tm) Controller
>> IDE Drive 160Gb
>> ATI All In Wonder 9800 Graphics Card
>> Adaptec SCSI Card AIC 7850
>> Soundblaster Audigy
>>
>>
>>
>>
>> I have tried the following returning to a stard build
(using Norton Ghost)
>> between attempts;
>>
>> 1) I originally downloaded the Network version of SP2 -
I then tried
>> applying the update using Automatic Update. This failed
with the same
>> error.
>> 2) Boot into Safe mode works
>> 3) Disabling all options in the Startup list using
msconfig still did not
>> allow a boot up.
>> 4) Disabling services that were not started up in Safe
mode and then
>> trying
>> a Normal boot did not work. I do not understand what
else Safe mode is not
>> starting up but if I did I'm sure it would give me a
clue.
>> 5) Updated drivers for Graphic Card, Motherboard,
Soundblaster and SATA
>> drives. This did not make a difference and I did not
see any comments
>> regarding resolving SP2 issues.
>> 6) Tried doing a startup with logging - The error seems
to occur before
>> the
>> logging starts so this hasn't yet helped to pinpoint
the problem.
>> 7) Tried installing onto IDE drive as the Active
primary partition on the
>> first drive - This gave the same result.
>> 8) Tried removing SP2 from Safe Mode - PC would then
work again as normal
>> but obviously I cannot then benefit from the security
updates.
>> 9) Tried updating SP2 both with and without Norton
Internet Security
>> Professional installed.
>> 10) The error message does not list a particular driver
in association
>> with
>> the STOP message on the BSOD
>> 11) Disabled various devices within Device manager
(Sound card, Game Port
>> etc) without any success although I may have missed the
important one.
>> 12) Tried turning off DEP Protection
using /NoExecute=AlwaysOff as opposed
>> to /NoExecute=OptIn
>>
http://www.microsoft.com/technet/prodtechnol/winxppro/maint
ain/sp2mempr.mspx)
>>
>> 13) Searched the following;
>>
>> 0x0000007E, 0xC0000005, 0xFC5CCAF3, 0xFC90F8C0,
0xFC90F5C0 Error Message
>> at
>> Startup {KB 321637} Win XP
>> - Followed this with a disable rather than an
uninstall - Will try
>> uninstall
>> next
>>
>>
>> 0x0000007e Error When Registering OLEMSG32.DLL or
CDO.DLL Files {KB
>> 238265}
>> Win NT, Win 2000
>> - Does not match the symptoms
>>
>> 0x7E Error Occurs in Kbdclass.sys When You Try to Shut
Down Win XP {KB
>> 313050} Win XP Professional
>> - Does not match the symptoms
>>
>> "STOP 0x0000007E" Error Message After You Upgrade to
Windows XP {KB
>> 330182}
>> Win XP
>> - There is loads of hard disk place.
>> - I have not been brave enough to update the
motherboard BIOS yet but have
>> not seen any comments about SP2 issues on the ASUS web
site just a
>> reference
>> to Supporting more processors.
>> - I have tried disabling devices but I haven't hit the
right one yet (If
>> there is right one?)
>>
>
>
>.
>
- Next message: Alex Nichol: "Re: WinXP SP2 Pro: Page File"
- Previous message: Alex Nichol: "Re: Beta SP2 and slipstreamed disk"
- In reply to: Will Denny: "Re: STOP 0x0000007E Error on installing Service Pack 2"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
