After upgrade to SP2, PC can't be found by other PC's

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

anonymous_at_discussions.microsoft.com
Date: 08/17/04


Date: Tue, 17 Aug 2004 06:43:19 -0700

Read the article 842242

http://support.microsoft.com/default.aspx?kbid=842242

>-----Original Message-----
>Since upgrading to SP2, my PC can't be found by the
>other PCs on my local network.
>
>The problem started immediately after I installed
>the SP2 "upgrade". I was unable to map to shared
>directories on the PC with SP2 from other PCs.
>Something I had been doing constantly without a
>single problem.
>
>In trying to debug this, I quickly found that in
>general, the PC with SP2 became "invisible" to the
>other PCs on the local network.
>
>If I do a Ping against the PC with SP2 from another
>PC, it will just time out. If I do a "find computer",
>it will come back NOT FOUND. Even if I try to Ping
>the PC with SP2 using its IP address, it times out.
>
>Let me note, though, that on the PC with SP2, I can
>successfully Ping itself. I don't know if that means
>anything, but I thought I would mention it.
>
>I have the new SP2 firewall completely turned OFF. At
>least according to the SP2 Security Center. So, it can't
>be related to the firewall settings, can it?
>
>In desperation, I uninstalled SP2, and my PC with XP
>(now at SP1) returned to working just fine. :)
>
>* What's wrong with SP2? Why is SP2, without the
firewall,
> stopping other PCs on the local network from "seeing"
it?
>* More importantly, if I ever re-install SP2, what
options
> do I need to set to get it to work right???
>* Is there a new way to share directories in SP2???
>* With the firewall turned OFF, how can I change its
setting?
> Right now, the Security Center doesn't allow you to
enter
> the firewall GUI when it is turned off.
>* Am I stuck with never being able to upgrade to SP2 or
any
> future updates?
>.
>



Relevant Pages

  • Re: question about clean install after SP2
    ... > After SP2 install my IE was seriously defective. ... You should periodically defragment your hard drives as well as check them ... using Windows XP "prettifications". ... You should at least turn on the built in firewall. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Browser Adverts????????
    ... With everything in this list and SP2.. ... It contains advice ... using Windows XP "prettifications". ... You should at least turn on the built in firewall. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Service Pack 2 destroyed my C: drive
    ... > I installed SP2 using the CDROM on an XP Pro system. ... It contains advice ... Windows XP, I suggest you clean up your system first. ... You should at least turn on the built in firewall. ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: What to do??
    ... Just install SP2 ... It contains advice ... > Windows XP, I suggest you clean up your system first. ... You should at least turn on the built in firewall. ...
    (microsoft.public.windowsxp.general)
  • Re: What to do??
    ... Just install SP2 ... You should periodically defragment your hard drives as well as check them ... using Windows XP "prettifications". ... You should at least turn on the built in firewall. ...
    (microsoft.public.windowsxp.general)