Re: USB Hard Drive loses its USB connection constantly

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Julian Milano (jdmils_NOSPAM_at_datafast.net.au)
Date: 06/08/04


Date: Wed, 9 Jun 2004 00:02:29 +1000

John,

Each device is on it's own USB port. Each is connected directly to a USB
port directly off the mobo.

-- 
Julian Milano
"John A" <not@available.com> wrote in message
news:fm4bc0tl90b9gqd4aa7r7avigk4jbro3t3@4ax.com...
> Do the devices work if they are plugged directly into the USB port, ie
> not via the hub?
>
> Is it a powered USB Hub?
>
> John Allen
>
> On Tue, 8 Jun 2004 19:42:32 +1000, "Julian Milano"
> <jdmils_NOSPAM@datafast.net.au> wrote:
>
> >When I plug in my external USB hard-drive (new WD120GB in a USB external
> >case), the Autoplay dialog pops up, scans the hard disk looking for
content,
> >then asks what I want Windows to do with it.
> >
> >But for some reason, this keeps happening every 20 seconds. It's like the
> >USB port loses its connection to the external drive and then finds it
again,
> >and acts like the device has just been connected.
> >
> >This is happening with my External USB CDRW drive, USB hub and USB
external
> >hard disk. If I plug these devices onto my laptop, they work fine. If I'm
> >lucky, the external USB hard drive stays connected for 10 minutes, but
will
> >eventually drop the connection then find it again.
> >
> >My system was dinging & donging all throughout the night, until I found
out
> >that the PC was losing and then finding its USB connection with the USB
hub.
> >
> >What could be wrong? Where do I look for an answer?
> >
> >PC Details:
> >WindowsXP SP1
> >Asus P4B533- 6 USB ports
> >Asus V8200 Deluxe video
> >WD120GB HDD (internal)
> >512 MB RAM
> >WD120GB HDD (External via USB)
> >
> >USB Details:
> >[QUOTE]       Selected Resource Report  -  Page: 1
> >
> >       ******************** SYSTEM DEVICE CLASS ********************
> >
> >       Class: Universal Serial Bus controllers
> >       Device: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
> >       Resource:
> >         IRQ: [00000016]
> >         IO: [0000D800 - 0000D81F]
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
> >       Resource:
> >         IRQ: [00000019]
> >         IO: [0000D400 - 0000D41F]
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
> >       Resource:
> >         IRQ: [00000018]
> >         IO: [0000D000 - 0000D01F]
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: Intel(r) 82801DB/DBM USB 2.0 Enhanced Host Controller -
24CD
> >       Resource:
> >         IRQ: [00000023]
> >         MEM: [FFEFE000 - FFEFE3FF]
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: USB Root Hub
> >       No resources used.
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: USB Root Hub
> >       No resources used.
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: USB Root Hub
> >       No resources used.
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: USB Root Hub
> >       No resources used.
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: Generic USB Hub
> >       No resources used.
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: USB Printing Support
> >       No resources used.
> >       Device Drivers:
> >
> >       Class: Universal Serial Bus controllers
> >       Device: USB Mass Storage Device
> >
> >       Selected Resource Report  -  Page: 2
> >
> >       No resources used.
> >       Device Drivers:[/QUOTE]
>


Relevant Pages

  • Re: My USB SP2 fix
    ... I have 6 USB devices that were connected to this PC before the SP2 update ... Class: Universal Serial Bus controllers ... Device Drivers: ...
    (microsoft.public.windowsupdate)
  • Re: pnpacpi : exceeded the max number of IO resources
    ... The pnpacpi rsparser.c report warnings of: ... Allocating PCI resources starting at 50000000 ... usbcore: ... system 00:01: ioport range 0x800-0x85f has been reserved ...
    (Linux-Kernel)
  • Re: "Non-volatile" OS ?
    ... >> process plus any OS resources used by the process (things like file ... file system plugged in on a USB key. ... a smooth shutdown, ... then restart all processes and message them ...
    (comp.arch.embedded)
  • Finding an updated XP driver for USB 1.1 port
    ... Im at the current maintenance level for IBM and Microsoft. ... The Universal Serial Bus Controllers and Standard Universal PCI to USB ...
    (microsoft.public.windowsxp.hardware)
  • Re: Motherboard Manual - KOB 693 DCS
    ... following under Universal Serial Bus controllers: ... # USB Root Hub ... # VIA Rev 5 or later USB Universal Host Controller ...
    (alt.comp.hardware.pc-homebuilt)