Can't get on the Internet

From: Ken (anonymous_at_discussions.microsoft.com)
Date: 06/16/04 

Date: Tue, 15 Jun 2004 17:46:11 -0700

Hi All,

I got 10 client machines and one router, the router is
acting as the gateway and switch. All client machine are
plugged into this router. Clients are able to share files
and access Internet through this router switch. However,
there is one machine that is fail to do so. It can ping
to the router gateway and share files with other machine
on the network. However, it is not able to get on the
Internet as the other clients do. The setting is exactly
the same as all other machine on the network. It is using
a static ip inherited from a old computer which has
removed from the network. I am sure there are no
duplication of ip address on the network. There is no
firewall or Anti-virus software running on the machine
neither on the network. What likely is the cause of this
problem?

It is running under a Workgroup. I tried to plug the
machine to another port on the switch, but it doesn't make
any different.

Relevant Pages

  • Re: VPN over wireless
    ... Support with a Cisco Switch it would work. ... on my network - and no success. ... You will still the need the Router to issue DHCP and ...
    (microsoft.public.windows.server.sbs)
  • RE: Active Directory New Site
    ... The internal uplink to the router would be on your 192.168.16.0/24 network ... Would it be as simple as putting the router between the existing switch, ... The piece of equipment you are missing is a router to get you from one ...
    (microsoft.public.windows.server.active_directory)
  • RE: Active Directory New Site
    ... I was warned off the RRAS service for this type of network challenge. ... a new switch with the second redundant server/dfs replica on? ... Sites and Services to create a new site, then inside that, the server object ... The piece of equipment you are missing is a router to get you from one ...
    (microsoft.public.windows.server.active_directory)
  • Re: Ethernet network wiring ?s
    ... >>> Thanks for the help and network education. ... your router will assign all 5 computers unique IP ... >> even if there are several cascaded ethernet switches and only one cable ... >> switch in that room. ...
    (comp.sys.mac.hardware.misc)
  • Re: Can this be done? Diagnostic Tool
    ... > A linux box with two interfaces that I could drop into any ... > network, for example between the router and the switch, without ... > of traffic at that point in the network. ... a cable going to the router, and a cable going to the switch, you could ...
    (comp.os.linux.networking)