Peer to Peer Problem

From: MGGP (anonymous_at_discussions.microsoft.com)
Date: 05/31/04


Date: Sun, 30 May 2004 21:17:19 -0700

Is the firewall turned on ?

>-----Original Message-----
>Computer 1 ("Jim") is XP Home. Computer 2 is XP Pro. They
are in a
>peer-to-peer network behind a router. Both machines can
get to the
>Internet fine. Computer 1 is set to static. Computer 2
receives an IP
>address from the router via DHCP. Both are in the same
workgroup.
>Neither machine shows up in the other machine's My
Network Places. The
>printer on Computer 1 is shared as "printer". If I type
Start | Run |
>\\jim\printer from Computer 2, the printer cannot be
found. If I go to
>\\192.168.2.128\printer (the IP address for Computer 1),
the printer IS
>found and can be printed to.
>
>The problem is acting like DNS. I think it is related to
Computer 1
>being static. If that's correct, then I omitted
something. DNS is set to
>the ISP's DNS (the same ones that were handed out by the
ISP). The
>default gateway is set to router's IP address. What have
I overlooked?
>.
>



Relevant Pages

  • Re: Testing environment question
    ... For your domain members to function properly they must use the local DNS server. ... Turn off the DHCP function on the router. ... You can set up DHCP on the DC or you can just configure the machines manually to use the router for default gateway but use the DC for DNS. ...
    (microsoft.public.windows.server.general)
  • Re: DNS Problem??
    ... In the DHCP field at the router, ... > DNS but it adds the 'public' side DNS automatically. ... Do you have another SERVER class machine with the clients? ...
    (microsoft.public.windows.server.dns)
  • Re: DNS problem local network with wireless router
    ... domain must only use the DNS server that is hosting the AD ... This is because your router or ISP does not host the zone, ... > DSL Router has DHCP and provides address to w2k AD server's 3Com NIC. ... > Ethernet adapter Local Area Connection 3: ...
    (microsoft.public.win2000.dns)
  • Re: DHCP from Router to SBS Server
    ... If you are using a single NIC configuration you can use the DHCP on the router *IF* your router supports forwarding DNS to a computer on the LAN side. ...
    (microsoft.public.windows.server.sbs)
  • Re: Testing environment question
    ... For your domain members to function properly they must use the local DNS server. ... You can set up DHCP on the DC or you can just configure the machines manually to use the router for default gateway but use the DC for DNS. ...
    (microsoft.public.windows.server.general)