Re: XP randomly restarts on me

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Travis King (anonymous_at_none.com)
Date: 04/04/04


Date: Sun, 04 Apr 2004 22:46:55 GMT

Is your computer new? If it has been doing this since day one, a setting
may not be correct. I agree with what the other people have said so far...
it could be the memory, a driver, etc.
I wouldn't recommend trying this, but if you feel like trying this, go
ahead... This is more for computer experts then typical people. You may
want to try contacting your system's manufacturer first if you have one.
If your computer is new, try going into your computer's BIOS. Make sure
that the VCORE or voltage isn't too high... It's kind of hard to tell you
where it should be because I have no clue what kind or processor your system
has. Also while you're in the BIOS, make sure that the Frequency or FSB
isn't too high. Same goes with the multiplier. The FSB (frequency) should
be half of what it really is in the BIOS. For example, if you have a 333MHz
FSB CPU, the Frequency in the BIOS should report 166MHz. Then the
multiplier should be multiplied times the FSB to get your processor's speed.
If the speed is above your processor's actual speed, this could cause random
reboots.
Formula: Multiplier x Frequency = Processor speed
Your motherboard may not have these settings in the BIOS however. They
could be jumpers on the motherboard if they aren't in the BIOS. Warning:
Incorrect settings could cause damage to your system.
"dglock" <anonymous@discussions.microsoft.com> wrote in message
news:138a301c41a8d$6863fa30$a001280a@phx.gbl...
> this could be either virus related or hardware.
> is this a desktop or laptop?
> this type of behavior is many time caused by excess heat.
> are all your fans running?
> a faulty ram module will also cause the computer to
> reboot.
> might also be the drivers for you graphics card are not
> right or corrupt.
> you said you just formated,did you install the
> motherboard drivers from the cd?
> some times the generic drivers that windows uses are not
> the best for that brand of hardware.
> don
>
> >-----Original Message-----
> >I'm experiencing these unexplained crashes in XP, not
> the
> >kind of crash where you get to close the frozen program
> >and keep working...but the kind of crash in which I'm
> >minding my own business and the machine just randomly
> >restarts. It's only happened a handful of times, but so
> >far the trend seems to be that it occurs while opening a
> >file (e.g. Word doc) or copying/moving files between my
> HD
> >and external backup drive.
> >
> >Then I get the blue screen during bootup, asking me to
> >check the file system on my C drive for errors. For
> >instance, when it happened earlier today, I got this
> >prompt:
> >
> >For the file "C:/.../Microsoft Office/Recent/<<Word file
> I
> >was using when it crashed>>.LNK", first allocation unit
> is
> >not valid--the entry will be truncated. I suppose this
> >could just be an aftereffect of the crash...
> >
> >I just formatted my hard drive two days ago, so it's not
> >like there should be a ton of baggage in the file system
> >which would make the machine unstable (or should it?).
> >
> >Any insight?
> >Thanks!
> >Paul
> >.
> >



Relevant Pages

  • Re: blank bsod
    ... My FSB is set to 166 MHz, although overclocking to ... > 200 MHz FSB doesn't really change the stability at all. ... > et cetera in the BIOS. ... Put the multiplier down to 10, ...
    (microsoft.public.windowsxp.games)
  • Re: Whats a good timing set for E6600 and P5W DH?
    ... Please list Clock multiplier, FSB, CPU settings, and chipset ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Installing K6-2 333MHZ on TX97-XE from k6 166MHZ
    ... I also found a tweaked bios for this board that supports the faster ... Liquid wrote: ... Like on my newer A7V333 the bios and FSB upper setting goes up with pci ... I'm trying to find the settings for a k6-2 333 for TX97-XE revision ...
    (alt.comp.periphs.mainboard.asus)
  • Re: issue with multiplier a7n8x-e
    ... How can I set back the correct settings (in the bios, the fsb is 166 now, and the multiplier as "auto", and in manual the default is 12.5x; ...
    (alt.comp.periphs.mainboard.asus)
  • Re: A7V8X-X settings unclear for AMD XP 2800+
    ... Could somebody give me hints how to change the BIOS settings ... also as your cpu is lock your multiplier should be set to 12 for 2 ... any higher frequency and will run at stock speed because the cpu is ... I raised the FSB to 200MHz which should be possible with PC3200. ...
    (alt.comp.periphs.mainboard.asus)