Re: Cable Modem Router problem

From: Kelly (kelly_at_mvps.org)
Date: 03/15/04 

Date: Sun, 14 Mar 2004 23:41:08 -0600

I hear you and have been there. :o) Glad you have it sorted, John. 

--
All the Best,
Kelly
Microsoft-MVP Windows® XP
Troubleshooting Windows XP
http://www.kellys-korner-xp.com
"John" <someone@nowhere.com> wrote in message
news:e7Y8$9bCEHA.1604@TK2MSFTNGP11.phx.gbl...
> Thanks Kelly. Problem solved. It was the Netbios over TCP/IP not active on
> all PC's.
> Its running like a dream. Thanks again
> See, theres nothing like a fresh head :)
> Ive been too close to the problem and didnt see the bloody obvious.
>
>
>
> "Kelly" <kelly@mvps.org> wrote in message
> news:eNvEVqZCEHA.2908@TK2MSFTNGP09.phx.gbl...
> > Hi John,
> >
> > Do some reading here and good luck!:  http://tinyurl.com/2ofo9
> >
> > --
> > All the Best,
> > Kelly
> >
> > Microsoft-MVP Windows® XP
> >
> > Troubleshooting Windows XP
> > http://www.kellys-korner-xp.com
> >
> > "John" <someone@nowhere.com> wrote in message
> > news:ujQuTfZCEHA.1236@TK2MSFTNGP11.phx.gbl...
> > > People, I have a problem which is driving me nuts.
> > > I'll be thorough to save reposting answers. Hopefully one of you
> geniuses
> > > will have the answer :)
> > > I purchased a Netgear Cable internet router.It allows five pcs on a
LAN
> to
> > > be connected. My network was working previously via Internet Sharing
on
> my
> > > PC (two network cards, one for the cable modem and one for my home
LAN)
> > > This worked through an old 10mb switch and all pc's could connect to
the
> > > internet as well as accessing the PC's on the LAN. After connecting
the
> > new
> > > router, all pc's can access the internet but cannot see each other on
> the
> > > network.
> > > The router has a gateway 192.168.1.1 with SM 255.255.255.0
> > > All pcs have DHCP IP addresses (from the router) All looks good. The
> IP's,
> > > subnet masks and workgroup names are correct on each PC (192.168.1.2 -
> > > 192.168.1.50)
> > > The config page on the router shows all the pc's and details as
attached
> > > devices.
> > > All PC's can ping the router and TCP/IP is installed correctly on each
> PC
> > > AS I said before, everything was working previously on the old 10MB
> > switch.
> > > At first I thought the router may be faulty but I also have a spare
> 100mb
> > > Netcomm switch which brings up the same problem. The chances that both
> the
> > > router and the fast Ethernet switch are both faulty is a bit hard to
> > > swallow.
> > > When you go into My Network Places, it takes ages to see the
workgroup,
> > but
> > > it does eventually come up. But no PC's are visible and I get the
> message
> > > like.
> > > "Workgroup is not accessible. You might not have permission to use
this
> > > network resource.Contact the administrator of this server to find out
if
> > you
> > > have access permissions. The network path was not found"
> > > I think I need a fresh head
> > > All NICS are 10/100 and are set to auto detect. I have also tried
> manually
> > > setting them to 10MB, but to no avail
> > >
> > > Help aaaarghhhh!!!
> > >
> > >
> > >
> >
> >
>
>

Relevant Pages

  • Re: Unable to obtain a server- assigned IP address Try again later or enter an IP address in Net
    ... I can go to Control Panel - Network and Internet Connections - ... If yours is not a subset of your router, ... I have a LINKSYS router (4 port connection) - I have my cable modem ...
    (microsoft.public.pocketpc)
  • Re: Boot-up question on SBS2K3
    ... > The router separates you from the Internet. ... > network. ... >>>> 2 Nics, broadband cable modem connected into the external NIC, ...
    (microsoft.public.windows.server.sbs)
  • Re: Need help closing security holes in my Windows XP home system!
    ... >>new portals of access to internet hackers, ... My router came with a default MAC address printed on the bottom. ... > your unique hardware as in your segment of the network - no other device ... > Apply ALL MS Office Updates ...
    (comp.security.firewalls)
  • Re: Open access point for clients
    ... Boss wants clients to have access to internet ... If you knew enough to get the network setup like it is already then you ought to know how to do this. ... If you can't get a second ip then connect one router to your isp and then connect wan ports of two additional routers to lan side of ISP connected router. ...
    (alt.internet.wireless)
  • RE: Small network with lots of features, questions
    ... Your network sounds overly complicated to me. ... to get to the internet. ... To do that, without using your server as a router, you need ...
    (microsoft.public.windows.server.networking)