Re: wrong setting?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: christia (anonymous_at_discussions.microsoft.com)
Date: 02/15/04 

Date: Sun, 15 Feb 2004 09:21:05 -0800

     The resolution is 1400 by 1050 pixels. The exact wording for Display: 1. (Multiple Screen Monitors) on MOBILITY RADEON 9000. The screen above shows a large highlighted screen labeled 1 and a smaller screen on the right labeled 2. This is confusing as I only have this laptop and don't connect it to anything else except a my wireless home network. It must be nice to have dell anxious to please -- I find their support atrocious. This insperon is a replacement for the prior one which was a lemon. I kept getting does not recognize device message on start and the batterry would not charge. Dell replaced adapter, motherboard, battery and finally sent me a new inspiron. So far this one works fine except for the scrambled charts and type. When I bought the original inspiron I chose the best graphics card I could get at the time, knowing I would need it for the charts.

My other computer is a mac, so intuitive and easy, but unfortunately trading requires a pc

thanks much, christia
     ----- txm wrote: -----
     
     I have the same adapter in my Dell Latitude and the display is a little
     strange (different than the other Latitudes at work that I've set up)... but
     I never really cared, it's good enough for general network use. Some
     graphics seem boxy... hard to explain... as you already know. What's the
     screen resolution set to (you'll find it on the same dialog box as the
     adapter)? Unless someone else here has a better answer, I can recall one of
     my co-workers laptops for "maintenance" on Monday I take a peek at their
     settings. Hopefully there is an updated driver that will fix the problem.
     If I remember correctly Dell "upgraded" my display for free because they
     were back-ordered on the cheaper type I originally ordered + my organization
     drops a lot of cash at Dell and they want to keep us [me] happy.
     
     Bummer, I need hot stock tip...
     
     tom
     
     
     
     "christia" <anonymous@discussions.microsoft.com> wrote in message
     news:C98F6491-5A2A-4532-A005-059D6C296E2E@microsoft.com...
> your instuctions were perfect -- mobility radeon 9000
>> there's a 50% chance a stock may go up or a 50% chance it may go down. And
     then again, it may not move at all.
> Sorry no stock tip. I'm a short term technical trader and play quick odds.
>

Relevant Pages

  • Re: When it rains, it pours...
    ... With no cards at all installed, running the stock 65816, you can hear the Disk ... If I had the adapter plugged into the unit, ... Just when I was convinced I was losing it completely, I pulled the Little-Power and put in a stock GS power supply. ...
    (comp.sys.apple2)
  • Re: When it rains, it pours...
    ... you a ROM03, as well, but, I have the same 2 that ... With no cards at all installed, running the stock 65816, you can hear the Disk ... If I had the adapter plugged into the unit, ... Just when I was convinced I was losing it completely, I pulled the Little-Power and put in a stock GS power supply. ...
    (comp.sys.apple2)
  • Re: New ILEC SN-10 USB adapter available.
    ... The panel-mounted connector from the SN10 panel cable connects to the adapter and the adapter connects to the panel where the panel cable's connector had been previously. ... Dealers should have them in stock in a week or so. ... Tom Knauff ...
    (rec.aviation.soaring)
  • Canon Cable Release Adapter T3 - VS - the RS-80N3
    ... I had wanted to get the Canon Cable Release Adapter because it sounded more ... the store only had an RS-80N3 in stock. ... JSM ...
    (rec.photo.digital.slr-systems)