What problem are you having? Are you trying to disable the onboard
graphics? If so, you can disable it in the BIOS - refer to your manual
for instructions to access the BIOS specific to your Gateway model .
Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________
MIKE.V Wrote:
=================
| HELP!!! I AM TRYING TO UNSTALL A NEW VIDEO CARD AND I HAVE PROBLEMS.
Re: GeForce4 MX440 in Hiding ... You may need to check in the bios to see if you need to disable the onboard... the onboard graphics.... enter bios and set the bios to use a plug-in card... (microsoft.public.windowsxp.hardware)
Re: A Open MK77MII ... >Built a computer about a year ago and since it had onboard graphics decided... >to install a new card, I disabled the onboard in the Bios and the computer ... >refuses to show any graphics at all can't even get into the bios or DOS ... (alt.comp.hardware.pc-homebuilt)
Re: Can Nobody Help Me? ... >Didn't say anywhere that you turned off the onboard graphics in BIOS.... You have indicated that you have the onboard video,... (alt.os.linux.suse)
Re: Need to reinstall WinXP after changing bios parameters? ... I did not change any hardware, I only changed some bios parameters (PEG Link... Spontaneous reboots, sometimes graphics driver stuck in infinite loop, ... when PEG Link Mode is set to a value other than Slow ... (microsoft.public.windowsxp.setup_deployment)
"Hello, Dawn!" protected mode boot sector ...protected mode boot sector with no bios calls. ... It's written in 32 bit assembly language, and uses the 640X480X16 graphics... No bios calls are used at any time. ... (alt.lang.asm)
