Re: poor performance with ATI's X600

Rich Barry wrote:

> Eric, according to this review you Card did fine. It's the Benchmark
> http://hi-techreviews.com/nuke/x600/x600_4.htm
>
> "Eric" <nospam@xxxxxxxxx> wrote in message
> news:DpidnbK2ZvmWOubfRVn-pw@xxxxxxxxxxxxxx
>> I've got a 3.4 Ghz P4, 2 Gig DDR2 ram, D915PBL mobo, an ATI X600 card
>> with ATI's latest driver, WinXP Pro SP_2, Two 120 Gig SATA Drives
>> configured as RAID 0 (Striping for performance) and plenty of free disk
>> space, my display
>> is set at 1280x1024 32BPP.
>> I downloaded and ran 3DMark05 (which switches to 1024x768 when run) and
>> the
>> performance is horrible, 2 to 8 FPS.
>> I surely must have something badly mis-configured.
>> Any ideas on what to check?
>> Thanks
>> Eric
>>
ok, thanks, BTW that link seems to be down.
Eric

.

Relevant Pages

  • Re: poor performance with ATIs X600
    ... It's the Benchmark ... > ATI's latest driver, WinXP Pro SP_2, Two 120 Gig SATA Drives configured as ...
    (microsoft.public.windowsxp.games)
  • Re: IEE1394 help
    ... driver, I tried it again in mine using every PCI slot making sure it was ... I decided to reinstall Winxp pro and the card the installed perfectly ... someone still has an idea why it would not install on what I thought was a ...
    (microsoft.public.windowsxp.help_and_support)
  • RE: [UPDATED PATCH] EFI support for ia32 kernels
    ... >> reuse a single driver image for multiple architectures assuming there ... As one of the people responsible for the EFI Specification and our ... Perhaps the UNDI network card interface that Intel developed ... BIOS can't shadow that much ROM code. ...
    (Linux-Kernel)
  • Re: Linux, X, ld, gcc, linking, shared libraries and stuff
    ... >> because, originally, video cards / system RAM could NOT afford to have ... > GL actually "copies" everything, but it's done by the graphics card, so ... > anyway if it's not hardware accelerated. ... installed the proper driver, then it zooms around the screen... ...
    (alt.lang.asm)
  • Re: XXX_Init only being called once
    ... > My stream interface driver has been stripped right back to try to solve ... > I plug my card in the first time. ... > There are two new active keys in the registry PCMCIA and myDriver. ... > No entry points are called in my driver. ...
    (microsoft.public.windowsce.platbuilder)