Re: allowing limited user to change ip adress

Dear Sean,

Thank you for your reply. Netsh.exe didnt work as well. What i have noticed
is that with a XP pro sp2 installed on my laptop , the local user(who is
added to Network Operators Group) can see the ip and can change the settings
in tcp/ ip settings page .
IN my embedded system , the local user(who is added to Network Operators
Group) can see only "get automatic ip " settings marked even if the ip adress
is already set as a static ip from administrator. So when i type a static ip
, mask and gateway ,it asks for a reboot but comes up with the ''get
automatic ip" marked and ip adress unchanged.
I have loaded your full xp pro sp2 component to my image to see any
components missing but i had the same problem above. what can we miss as a
component or a setting different from the xp pro in my laptop compared to Xp
embedded.? Maybe the local user cant write the ip info somewhere in the
system , i dont know.

Thank You

Best Regards

Ferhan

"Sean Liming (MVP)" wrote:

Interesting. Open CMD.EXE with RUNAS and then try opening control panel or
run netsh.exe.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit


"vision4u" <vision4u@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:86101376-E49F-456E-9EA0-66AA4AA4446B@xxxxxxxxxxxxxxxx
Dear Sean,

First of all thank you for your reply.I recently bought your books which
are guiding me very well in development of my project.

I have added the Runas component . I have noticed that i am still not
alowed
to manage Netwok connections as a local user , RUnas is not activated for
the
Network Connections but is activated for example for "Add Hardware" in
Control Panel.

Any Suggestions?

Regards

Ferhan

"Sean Liming (MVP)" wrote:


Local User accounts have limit rights to make system changes. You could
add
the RUN AS services and have the local user make the changes using the
Admin
account.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit


"vision4u" <vision4u@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:AFEB3129-DCAB-4632-9195-B5B473853E0E@xxxxxxxxxxxxxxxx
Hi Everybody,

I have two user accounts in my image, one admin , one local account.
From
the MMC & group policy settings i have also added the local account to
''network operators group '' in MMC . In the user account , I can now
display
ip from the control panel , network connections, LOcal Area Connections
window but the changes i made to the ip settings wants a reboot and
Nothing
is changed after reboot. the user accounts boots up dhcp enabled again.
Everything is fine with admin account and doesnt want a rebbot for the
changed i made to the ip settings. What am i missing ? How can i allow
the
local user to change ip settings without rebooting?
I have added the components ,group policy core and ''networking App.
Compatibility , security settings editor and administrations tools as
well
to
my image to be sure that i have everything from networking and
management
side.
Thank you in advance


.

Relevant Pages

  • Re: allowing limited user to change ip adress
    ... "Sean Liming " wrote: ... in tcp/ ip settings page. ... Maybe the local user cant write the ip info somewhere in the ... I have two user accounts in my image, one admin, one local account. ...
    (microsoft.public.windowsxp.embedded)
  • Re: allowing limited user to change ip adress
    ... Local User accounts have limit rights to make system changes. ... I have two user accounts in my image, one admin, one local account. ... the MMC & group policy settings i have also added the local account to ... ip from the control panel, network connections, LOcal Area Connections ...
    (microsoft.public.windowsxp.embedded)
  • Re: allowing limited user to change ip adress
    ... Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit ... the RUN AS services and have the local user make the changes using the Admin ... > I have two user accounts in my image, one admin, one local account. ... > the MMC & group policy settings i have also added the local account to ...
    (microsoft.public.windowsxp.embedded)
  • Re: problems accessing after workgroup change
    ... account for logon. ... don't know the password for local user account, ... One can be in domain or workgroup A and the other can be in domain ... or workgroup B. What you can do is map network drive. ...
    (microsoft.public.win2000.security)
  • Re: allowing limited user to change ip adress
    ... Local User accounts have limit rights to make system changes. ... account. ... > the MMC & group policy settings i have also added the local account to ... > ip from the control panel, network connections, LOcal Area Connections ...
    (microsoft.public.windowsxp.embedded)
Loading