Re: Installing Drivers Post FBA

Tech-Archive recommends: Fix windows errors by optimizing your registry



1. You probably want to place copies of ksuser.dll and ks.sys in the locations that the installer is looking for the dll.
2. Try DependencyWalker on the NVIDIA files to be sure that you have all the components in the image needed to support the video applications.


Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit


"Mike Warren" <miwa-not-this-bit@xxxxxxxxxxxxxxxxxxx> wrote in message news:xn0fqonhojayqz00q@xxxxxxxxxxxxxxxxxxxxx
I am trying to get an image that will work on quite a few different
(but similar) hardware configurations and want to be able to install
some drivers post FBA.

I've got it working reasonably except for 2 minor but annoying problems.

1/ When installing audio drivers, ksuser.dll and ks.sys are unable to
be found and I always need to manually tell the installer where they
are.

2/ When installing nVidia chipset or video drivers, NVUNIST.EXE will
crash many times. Clicking OK to these error dialogs doesn't seem to
affect the driver as it work properly after a reboot.

Anyone have any idea how I could go about debugging this?

--
- Mike

.

Relevant Pages

  • Re: [SLE] Black screen after NVidia update - 2nd posting
    ... > happen with a monitor - mod line or v and h sync problems. ... You might try reinstalling the drivers again. ... Yes, I have used the nvidia installer, and just did it again for the 3rd time. ...
    (SuSE)
  • Re: When was /dev/cua* depreciated?
    ... needn't have bothered with the Linux drivers if that's the best they can ... followed up with the fact the config file is under /usr/lib as is the log ... The installer shell script has no shebang at the top. ... I haven't even looked at the kernel code ...
    (uk.comp.os.linux)
  • Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
    ... Native one and legacy one. ... Loading generic drivers ... I also think the way I've implemented in the Debian installer should be ... I would unload ide-generic in the installer if no additional block devices ...
    (Linux-Kernel)
  • Re: Debian Sarge on SATA
    ... My CDROM works fine, only after loading the wrong drivers I had some issues with it, but that's pretty obvious. ... If I don't find a solution, I will go ahead and buy an IDE drive to install Debian to; I just can't believe, that I can't get it to work with SATA and this really bugs me... ... As soon as the installer tries to locate the HDD it fails with an error message. ... I actually was unable to install Sarge onto my older Pentium 3 machine because I was using a PCI controller that would allow me to use larger hard drives that my motherboard's controller could handle. ...
    (Debian-User)
  • Re: NICs wont keep static IP addresses, and other strangeness
    ... an update to the installer of this release, ... ipconfig /all shows the NICs with the addresses I set, ... If I reboot the server, the one NIC keeps it's IP address, ... I've tried uninstalling the Dell/Broadcom drivers, ...
    (microsoft.public.windows.server.networking)