Re: Bluescreen 7B




Check to make sure you are not missing a component:

http://www.seanliming.com/Docs/XPE%20Stop%200x0000007B%20Error%20V1.3.pdf

--
Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit


"David Jones vpac org>" <davidj <ATDOT> wrote in message news:1E502A2D-F154-4354-8F45-EDFE10DCBE2E@xxxxxxxxxxxxxxxx
Thanks for that Anthony.
I'll give that a try.

The box has the CF as Slave, but I'll do a double check.
- When I replaced the 2 gig drive and the CF, the system boots OK

With 4 Gig drive and CF system goes into BIOS OK and recognizes both but
Bluescreens on booting.
The Bluescreen when USB memory stick is inserted, even when not the target
of booting is also a concern.

Cheers
--
David Jones
Software Developer
(Embeddded Systems)
Victorian Partnership of Advanced Computing
Melbourne, Victoria Australia


"Anthony" wrote:

david,


try my PMQ file and creat again, and the default CF card is Slave .. have
you switch to Mater ?

ftp://download@xxxxxxxxxxxxxx/temp/xpimg/eBox4.pmq

Anthony

"David Jones" wrote:

> I had a unlicensed image working OK.
> System is an ICOP ebox 4854 with 2Gig Embed Disk, and 2 Gig CF
> Embed disk is OS.
> System is based upon HORM but FBA is configured to start with EWF off
>
> I created a new image and started FBA with the following change:
> - Using a 4Gig Embed disk instead of the 2Gig one.
> - Licesnsed
>
> I now get a blue screen.
> 0x7B 756FF528 C0000034 0x0 0x0
>
> Should I have rerun TAP and created a new system component or is there > a
> simple solution?
>
> System runs OK if I don't instert the CF.
> PS Tried it with 1 GIg and 2 Gig (same type) but both give errors.
> System also blue screens if I boot with a USB memory stick (actually a > USB
> CF holder)..but can insert OK after boot.
>
> Cheers
> -- > David Jones
> Software Developer
> (Embeddded Systems)
> Victorian Partnership of Advanced Computing
> Melbourne, Victoria Australia

.



Relevant Pages

  • Re: Unable startup Windows CE Platform Manager (3)
    ... I am using DMA/ KITL with the emulator. ... Yes Corecon is working. ... David Jones ... Victorian Partnership of Advanced Computing ...
    (microsoft.public.windowsce.platbuilder)
  • Re: cant figure out how to install Damn small linux from a USB drive
    ... Lan connectivity ... usb memory stick 1gb. ... machine will NOT boot from USB ... replace the dreaded win98 with DSL so I can make the switch in 2008??? ...
    (alt.os.linux)
  • Re: cant figure out how to install Damn small linux from a USB drive
    ... Lan connectivity ... usb memory stick 1gb. ... machine will NOT boot from USB ... replace the dreaded win98 with DSL so I can make the switch in 2008??? ...
    (alt.os.linux)
  • Re: boot problems?
    ... I am trying to boot 7.0-PRERELEASE on my notebook from USB memory ... With the original BTX i have "BTX halted". ... how did you buold / install FreeBSD on it. ... May be you want to look at m0n0wall and FreeNAS documentation as they both are FreeBSD based and can boot from usb stick:) ...
    (freebsd-stable)
  • PXE Installation
    ... First I tried to install FreeBSD to a USB memory stick, boot notebook from there and do sysinstall on a local drive. ...
    (freebsd-stable)