RE: Bluescreen 7B

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Thanks for that Anthony.
I'll give that a try.

The box has the CF as Slave, but I'll do a double check.
- When I replaced the 2 gig drive and the CF, the system boots OK

With 4 Gig drive and CF system goes into BIOS OK and recognizes both but
Bluescreens on booting.
The Bluescreen when USB memory stick is inserted, even when not the target
of booting is also a concern.

Cheers
--
David Jones
Software Developer
(Embeddded Systems)
Victorian Partnership of Advanced Computing
Melbourne, Victoria Australia


"Anthony" wrote:

david,


try my PMQ file and creat again, and the default CF card is Slave .. have
you switch to Mater ?

ftp://download@xxxxxxxxxxxxxx/temp/xpimg/eBox4.pmq

Anthony

"David Jones" wrote:

I had a unlicensed image working OK.
System is an ICOP ebox 4854 with 2Gig Embed Disk, and 2 Gig CF
Embed disk is OS.
System is based upon HORM but FBA is configured to start with EWF off

I created a new image and started FBA with the following change:
- Using a 4Gig Embed disk instead of the 2Gig one.
- Licesnsed

I now get a blue screen.
0x7B 756FF528 C0000034 0x0 0x0

Should I have rerun TAP and created a new system component or is there a
simple solution?

System runs OK if I don't instert the CF.
PS Tried it with 1 GIg and 2 Gig (same type) but both give errors.
System also blue screens if I boot with a USB memory stick (actually a USB
CF holder)..but can insert OK after boot.

Cheers
--
David Jones
Software Developer
(Embeddded Systems)
Victorian Partnership of Advanced Computing
Melbourne, Victoria Australia
.

Relevant Pages

  • Re: Best Way to Copy Hard Drive?
    ... BRH wrote: ... > the 80 Gig to the 200 Gig drive? ... You will boot with the utility with the new drive in slave ... In Memoriam - MVP Alex Nichol ...
    (microsoft.public.windowsxp.general)
  • Re: Changing boot hard drive
    ... I also have a 20 gig slave drive, which used to be a 10 gig. ... I have never changed that boot drive because I am not sure how. ... or format it with the /s switch, ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Hard Disk used space ?
    ... > I have a 200 gig slave hard drive. ... The total of all files on the disk now = 40 gig. ... You'd need to disable monitoring of that drive to insure ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: need help with 2nd drive on new mach.
    ... with 320 gig HD 2 gig Ram. ... I have right now a 200gig Maxtor as a slave driver and works fine, ... the BIOS, on the drive page, your drive should show. ...
    (alt.os.windows-xp)
  • Re: Dont wanna mess up new hdd, bios is too old for full recognition + install i think
    ... , i have had a 10 gig hdd since i bought the computer fer a tenner, a year ago, and i put a 4 gig slave drive in it. ... Now i know these are small drives, but I have just bought an 80 gig maxtor hdd, and when i insert it, in place of the slave, it is not recognised..altho, in ctrl settings/system/ its THERE.. ...
    (comp.sys.ibm.pc.hardware.storage)