Re: USB 2.0 boot problem - SOLVED

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

I finally solved the problem.

I had to install the Update Rollup1 containing the USB BOOT 2.0 UPDATE
KB931788 that was missing on my configuration.
After this all start functioning.

Thanks to everybody
Max

"Massimiliano Castelletto" <massimiliano.castelletto@xxxxxxxxx> ha scritto
nel messaggio news:O15Dr$dfIHA.4376@xxxxxxxxxxxxxxxxxxxxxxx
Sean Liming (MVP) ha scritto:

Do you have the USB Boot 2.0 component in the image?
http://www.seanliming.com/Docs/USB%202%20Flash%20Boot.pdf
Did you run TAP or TA to get the platform components?

You might be missing a driver -
http://www.seanliming.com/Docs/XPE%20Stop%200x0000007B%20Error%20V1.3.pdf

I thought that the configuration was good: if I run it using an hard disk
all the processes end with no errors; the problems arise when I copy the
post-fba files on an USB disk or I try to run the pre-fba directly using
the USB disk.

I tryed with two different disks, 1GB each, with the same problems.

I would like to build a simple configuration running over more than one
specific hardware in order to use it for maintenance pourposes not
depending by the pc. At worst I would like to create a configuration
"computer dependent" but I it wasn't successfull.

In the first configuration I tryed using the TAP created configuration, in
the second one just inserting some components manually; in both cases the
configuration functions saving the file on the hard disk, but doesn't
function putting them on the USB disk.

Max


.

Relevant Pages