Re: 0x0000007b (0xf79ba524, 0xc0000034, 0x00000000, 0x00000000) - USB

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance


Do you have the USB Boot 2.0 component in the image?

http://www.seanliming.com/Docs/USB%202%20Flash%20Boot.pdf

Is there a BIOS setting in the VIA system for emulting USB as a hard disk or USB HDD setting?

--
Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
"Rajesh" <Rajesh@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:6D2D3521-4A55-49F6-938D-920093C4B9FC@xxxxxxxxxxxxxxxx
Hi,

I am trying to use a USB Key to boot Windows XP embedded.

I am using a Via Mini-ITX (LN Series) board and I have tried multiple USB
Flash Disks (Transcend V30, MoserBaer 2GB, Transcend StoreJet 2.5 with 120 GB
IDE HDD). All of them have the same problem.

That is while booting it gives "STOP: 0x0000007b (0xf79ba524, 0xc0000034,
0x00000000, 0x00000000)".

When I use a normal 80 GB Maxtor SATA Drive the same image boots
successfully. After that if I insert the USB Flash disk I am using, it also
get recognized in the booted O/s. But with the USB Flash Disk and same O/S
image I am not able to boot.

I have already ensured that while running the TAP.EXE on this system my USB
Flash disk is present.

I tried to boot the system in safe mode the list of drivers being loaded
goes till "disk.sys" and after that same blue screen message appears.

I also know that the similar queries have been posted multiple times by
different people on this and many other groups. I have first tried to go
through but, it did not helped me.

Any help will be appreciated.

Thanks
--
Rajesh Thareja

.

Relevant Pages

  • ~~~~~~~~~~~~~~ USB BOOT ~~~~~~~~~~~~~~
    ... boot external sata on usb ... usb boot disk download ... which usb drives will boot dell ...
    (sci.psychology.personality)
  • Re: soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem
    ... > What messages are you getting from boot log and dmesg? ... ACPI tables contain no PCI IRQ routing entries ... RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize ... USB Universal Host Controller Interface driver v2.2 ...
    (comp.os.linux.hardware)
  • Re: Naming harddisks (Linux)
    ... But I also see that for an USB drive it uses /dev/sdas the ... Does GRUB recognize SCSI drives? ... The first step in understanding the boot process is to ... The bootloader's job is to load the OSs kernel. ...
    (comp.os.linux.misc)
  • Re: USB key requirement.
    ... I figured that after the root partition is mounted (nfs), ... wondering what good means the usb key in this case. ... continue the boot sequence. ... the key would be checked right after the block device is ...
    (Debian-User)
  • Re: UPDATE: El Torito Boot CD - USB CD-ROM
    ... There should be nothing preventing you from booting from USB CD-ROM as long ... Basically you have to make sure you included USB 2.0 boot component in your ... I can boot other CDs including Windows PE created CDs from the USB CD ROM ... What is different about running Windows XPE from a USB CDROM as opposed ...
    (microsoft.public.windowsxp.embedded)