Re: Image Problems

Hi Jason,

I mean you should try to load a pure XP Pro which didn't load any driver
into it and get pmq from that OS. Another fast way is use WinPE to boot
platform and get pmq. You can install drivers after FBA. The problem you
met might because the driver components in your TD database corresponding to
hardware definition (pmq) are not correct.

Ethan

"skylark_za" <skylarkza@xxxxxxxxxxxxxxxxxxxxxxxxx> ¼¶¼g©ó¶l¥ó·s»D:E6E92B6A-971D-4976-9A0E-A1C76400BC70@xxxxxxxxxxxxxxxx
Hi Ethan Chen

Thanks for your response. I have loaded a fresh XP Pro SP2 install on
which
I have loaded all the hardware drivers (LAN, VGA, Chipset) and then run
TAP.exe however I am still getting these the same results as I described
in
my first thread.

Any other ideas?

Thanks

Jason


"Ethan Chen" wrote:

Hi skylark,

You can try to get device pmq via TAP.exe from a clean XP Pro which is
only
OS installed without any driver or get pmq from WinPE. Use pure
envirnment
might be helpful.

Best Regards,
Ethan Chen

"skylark_za" <skylarkza@xxxxxxxxxxxxxxxxxxxxxxxxx> ???gco?l¢Do¡Ps?D:C5F19478-F474-410B-953D-AA9196972A8F@xxxxxxxxxxxxxxxx

I have developed a couple of basic Windows Based Terminals which seem to
be
having some trouble installing correctly. I have created 2 images for 2
completely different sets of hardware (motherboards/VGA/LAN) with very
similar results.

I initially installed XP Pro on a HDD and installed all the drivers. I
then
ran TAP.exe and inported this into the Component Designer and then
imported
the SLD file into the Component Database. From there I created a new
image
using the corresponding component in Target Designer including the
"Windows-based Terminal Professional". I have also included all the EWF
components as I am using a solid state HDD.

However, once the XPe image has booted, progressed through the FBA and
prompted for login, I get a number of error messages. I will list them
below.

"Windows could not load the installer for Ports. Contact your hardware
vendor for assistance."

"The instruction at '0x5f52c7ce' referenced memory at '0x00000058'. The
memory could not be 'read'."

"Error during installation of the Task Scheduler Service; MSTask.dll
error=14001"

"Exception C:\WINDOWS\system32\iasrecst.dll, DllRegisterServer,
0xe06d7363"

Any help in getting a good working image (RDP and IE) working would be
greatly appreciated.

Thanks





.

Relevant Pages

  • Lexmark 5000
    ... >I can't get the Lexmark 5000 printer to print on Windows ... I have installed a 5000 driver as well as the ... >to install ok, but when I send a simple text document ... >just isn't compatible with Windows XP pro. ...
    (microsoft.public.windowsxp.print_fax)
  • Re: Image Problems
    ... do you recommend using WinPE v1.0. ... I mean you should try to load a pure XP Pro which didn't load any driver ... into it and get pmq from that OS. ... You can install drivers after FBA. ...
    (microsoft.public.windowsxp.embedded)
  • RE: NO Sound....Audio Driver?
    ... I tried them out and NOTHING will allow install applications. ... cannot install...needs Update driver for Plug and Play Devices 536870397. ... He runs Win XP PRO ... Primary IDE MASTER / MAXTOR 6Y080P0 ...
    (microsoft.public.windowsxp.general)
  • XP Pro Monitor/Adaptor Problems
    ... After I got back up I noticed that the monitor was set to default and the adapter was set to unavailable when I click properties it comes up Vga Save and Non Plug and Play and Unknown, ... I tried installing the real drivers (Its a Radeon 9800 Pro) and it says cant install please install a standard VGA driver first. ...
    (microsoft.public.windowsxp.basics)
  • Re: XP Home->Pro Upgrade problems
    ... network itself, probably you donīt have a domain controller with DHCP so you ... With the XP Pro disk boot the machine make a clean install of Windows, ... properties, driver, update driver seach cd-rom. ...
    (microsoft.public.windowsxp.configuration_manage)