Re: fba.exe Application error

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I get the error when it's trying to install the components for the
first time. I'm thinking to put the image on a CD then copy the files
over to a empty hard drive with a NTFS file system then bless the boot
kernel with the attrib -h -a -s -r command and see if it boots.

On Aug 14, 2:28 am, "Sean Liming \(MVP\)" <sean_lim...@xxxxxxxxxxxx>
wrote:
A little dangerous with the dual boot. Typically, you want to do dual boot
with a seperate partition not using the same partition. Better to use
Virtual PC if you don't have a sperate partition available.

When do you see there error? During FBA? boot? Application start?

--
Regards,

Sean Limingwww.sjjmicro.com/www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit<tcpm...@xxxxxxxxx> wrote in message

news:1187050302.810701.257790@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

I'm building a XPE system for a car (carputer) so I can have a faster
boot time and such. Right now I have ran into a major problem. The
instruction is at 0x02322f5d referenced memory at 0x00000004. Memory
could not be written.

Heres my hardware setup.
Soyo SY-p4VGA
1GB DDR memory (two stick of 512MB)
20GB hard drive
DVD-R drive

As for the software i'm making it dual boot XP Pro and XPE. It's using
a single partition (NTFS).

Windows XP Pro - C:\WINDOWS
Windows XPE - C:\build\WINDOWS

Everything boots correctly. I'm using my main system to build the
image then saving the image via network connection to the system
stated above. I have the NTFS and NTFS Format components so it should
work. I ran the dependencies check countless times and no errors or
warnings. I have the design template set to Kiosk/Gaming Console. I've
copied all of the hardware from what was listed in device manager from
XP Pro as well. I'm not using any custom components, just what Target
Designer has to offer.

I have not tried using a FAT16/32 filesystem.


.

Relevant Pages

  • Re: Help installing both Fat32 AND NTFS on Seperate or Same drive
    ... Win9x/ME can't read, write, boot from, or even SEE an NTFS volume. ... Win9x/ME can't boot at all if the "system partition" (the first primary ... Boot from the WinXP ...
    (microsoft.public.windowsxp.hardware)
  • Re: User access
    ... If one uses the built-in groups/accounts when setting NTFS permissions ... What I stated relative to Safe Mode ... The NTFS partition is the boot ... > DriveImage 7.0 off a boot CD for recovery and it recognizes NTFS. ...
    (microsoft.public.security)
  • Re: I dont see anything to answer my q
    ... > just fine, but not NTFS. ... They have a live ISO that makes life nice. ... partition and created a 2GB swap and a 20G partition for the OS ... Then I dd off the the 1st 512 bytes of that drive(the boot sector) to ...
    (freebsd-questions)
  • Re: NTFS to FAT32?
    ... > partitioned in NTFS, it couldnt do the install - it needs to be changed ... > into the FAT32 format. ... I tried to use the fdisk utility on my 98 boot ... > partition from NTFS to FAT32 using either the 98 boot disk or CD, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Hide folders from different local users
    ... I feel I have to leave the XP partition Fat32 so both ... > if it was NTFS, 98SE would need it's own separate copy to run. ... plus security - if you care to convert your disk to NTFS. ... boot manager. ...
    (microsoft.public.windowsxp.security_admin)