Re: Problems with starting windows xp embedded
- From: "Sean Liming \(MVP\)" <sean_liming@xxxxxxxxxxxx>
- Date: Thu, 12 Jul 2007 09:12:06 -0700
Drive letters are always tricky for dual booting. You might want to take a look at this article on dual booting:
http://www.seanliming.com/Docs/XPE%20Dual%20Boot%20Tips.pdf
Regards,
Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
"Nemesis" <Nemesis@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:7CFFA477-DB14-4056-BF30-F5DDA6E75A63@xxxxxxxxxxxxxxxx
I saw it. But I don't understand. In my boot.ini I put drivers where is
system. I have 5 partition and G is partition where is windows embedded.
During the instalation I put G partition too. I don't understand where I can
change it now.
"Martin Grossen, eMVP [AVNET Silica]" wrote:
Incorrect WinDir: [G:\WINDOWS]
should be [E:\WINDOWS]
Is the key to your problem.
Change the path in your settings.
--
Martin Grossen, eMVP
AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe
Your competent partner for Microsoft Embedded licencing
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Nemesis" <Nemesis@xxxxxxxxxxxxxxxxxxxxxxxxx> schrieb im Newsbeitrag
news:6A8CA9B4-A458-470F-BB3B-3A70EAEF8991@xxxxxxxxxxxxxxxx
> Hello Martin,
>
> Thank you for response. I found those errors:
>
> 2:45:30 AM - [FBASetProgressText] Setting PNP Flag...
> 2:45:31 AM - [FBAApplySecurityStringToRegKey] RegSetKeySecurity > Failed!
> Error: 0x6
> 2:45:31 AM - [FBAReplaceSecurityInRegistry]
> FBAApplySecurityStringToRegKey(009) #1 Failed!
> 2:45:40 AM - [FBAFixWindowsPathsInRegistry] Incorrect WinDir:
> [G:\WINDOWS]
> should be [E:\WINDOWS]
> 2:45:40 AM - [FBAProcessRegisterDLLs] 65536081 -> Invalid Path:
> [G:\WINDOWS\FBA\FBALIB.DLL]
> 2:45:40 AM - [FBAProcessRegisterDLLs] 72089682 -> Invalid Path:
> [G:\WINDOWS\FBA\FBALIB.DLL]
>
>
> "Martin Grossen, eMVP [AVNET Silica]" wrote:
>
>> Hi Nemesis
>>
>> The logo is ok.
>> XP-Embedded is based on the XP Pro binaries.
>>
>> To the reboot:
>> Check the Target Device settings under Settings of your image.
>> Also consult the FBA (First Boot Agent) log on the harddisk
>> located in the Windows\FBA\fbalog.txt file to find it out.
>>
>>
>> -- >>
>> Martin Grossen, eMVP
>>
>> AVNET EMG Silica
>> Franchise Manager Microsoft Embedded Europe
>>
>> Your competent partner for Microsoft Embedded licencing
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> "Nemesis" <Nemesis@xxxxxxxxxxxxxxxxxxxxxxxxx> schrieb im Newsbeitrag
>> news:E3D75E79-2799-43C7-81A9-5EBD0542BFC5@xxxxxxxxxxxxxxxx
>> > Hello everybody,
>> >
>> > I have just installed Windows Xp Embedded on my computer. I did >> > exactly
>> > what
>> > they said on the website of microsoft. I created 700mb another
>> > partition I
>> > created image and put in the partition. I rewrote boot ini file and
>> > restart
>> > windows xp professional. Next I started windows embedded. First my >> > bad
>> > fillings was that the logo was windows xp not embedded. Next windows
>> > try
>> > to
>> > install component and each time during the instalation my computer >> > is
>> > rebooted. Does somebody any experience and can tell me hwat I did
>> > wrong?
>> > Thank for any replay.
>>
>>
>>
.
- References:
- Re: Problems with starting windows xp embedded
- From: Martin Grossen, eMVP [AVNET Silica]
- Re: Problems with starting windows xp embedded
- From: Martin Grossen, eMVP [AVNET Silica]
- Re: Problems with starting windows xp embedded
- From: Nemesis
- Re: Problems with starting windows xp embedded
- Prev by Date: Re: Problems with starting windows xp embedded
- Next by Date: Re: Problems with starting windows xp embedded
- Previous by thread: Re: Problems with starting windows xp embedded
- Next by thread: Re: Problems with starting windows xp embedded
- Index(es):
Relevant Pages
|