Re: 0x0000007B


Help me understand the IDE configuration - Is this an IDE to CF adapter on a secondary channel?
Is it possible to boot from a regular IDE/SATA hard drive?

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit



"Mike" <Mike@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:B63AE75E-536F-4009-8275-A19A3C32E284@xxxxxxxxxxxxxxxx
I am getting the dreaded BSOD 7B error during a first boot from compact flash.

I am attempting to build an XPE bootable image for compact flash on an Intel
DL201GLY motherboard. This is a new board, with SIS chipset (SIS662 /
SIS964L). The board has one IDE channel (with an added compact flash
adapter) and no floppy support.

I managed to build an XPE bootable image for a USB memory stick. When I
boot from USB, Windows does not see anything on the IDE channel. I've tried
both compact flash and CD-ROM. On the other hand, the BIOS has no trouble
recognizing either of these devices.

From the USB boot, I ran TAP (not TA) then created a .SLD file from the
resulting .pmq file. The Component Designer log file contained the following
warnings:

Warning:Could not find a driver for Video Controller (VGA Compatible)
(PCI\VEN_1039&DEV_6330&SUBSYS_D61F8086&REV_04).
Warning:Could not find a driver for Multimedia Audio Controller
(PCI\VEN_1039&DEV_7012&SUBSYS_D61F8086&REV_A0).
Warning:Could not find a driver for Generic volume (STORAGE\Volume).
Warning:Could not find a driver for Generic volume (STORAGE\Volume).
...
Info:Import succeeded with 63 drivers for 67 devices.

(I believe that VEN_1039 refers to Silicon Integrated Systems (SIS).)

The following SIS specific drivers were added to my devices component:

Info:Adding SIS Processor to AGP Controller to the component.
Info:Adding SiS 900-Based PCI Fast Ethernet Adapter to the component.
Info:Adding SiS PCI IDE Controller to the component.
Info:Adding SiS 7001 PCI to USB Open Host Controller to the component.
Info:Adding SiS PCI to USB Enhanced Host Controller to the component.

The following additional PCI/IDE related components were also added:

Info:Adding PCI bus to the component.
Info:Adding CD-ROM Drive to the component.
Info:Adding Disk drive to the component.
Info:Adding PCI standard PCI-to-PCI bridge to the component.
Info:Adding PCI standard host CPU bridge to the component.
Info:Adding PCI standard ISA bridge to the component.
Info:Adding Primary IDE Channel to the component.
Info:Adding Secondary IDE Channel to the component.
Info:Adding Logical Disk Manager to the component.
Info:Adding Volume Manager to the component.

In "KM's" posting to thread "Re: Unable to boot from a XPe NTFS CF" dated
"5/29/2007 10:16 AM PST" he mentioned the following library article:

http://msdn2.microsoft.com/en-us/library/ms940177.aspx

When I followed the instructions in that article, I found that all of the
components mentioned were already part of my devices component.

In "Sean Liming's" posting to thread "Re: Unable to boot from a XPe NTFS CF"
dated "5/29/2007 10:24 AM PST" he mentioned the following web page:

http://www.seanliming.com/Docs/XPE%20Stop%200x0000007B%20Error%20V1.3.pdf

The only thing missing from my device configuration that was in Sean's list,
was "Standard IDE/ESDI Hard Disk Controller". I added that, to no avail.

I even built an image based on Minlogin, which according to the experts has
the "basic components to build an image that will run on any system". Well,
it doesn't run on this motherboard, and I don't know how it could, since it
only contains a small subset of the components identified by TAP.

Can anyone help?

-Mike

.

Relevant Pages

  • Re: distro recommendation
    ... but which IDE chipset do you have? ... sor to DRAM Controller ... 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI ... 04d0-04d1: pnp 00:02 ...
    (comp.os.linux.misc)
  • Re: Boot loader doesnt see [root filesystem on] ATA disk after successful install
    ... > to boot the kernel on the IDE disk. ... hard disk on the same channel. ... >> and data problems are said to be likely on many controller and drive ... nothing about dual ATA. ...
    (freebsd-questions)
  • HPT366: 2.6.21 breaks HPT366 detection on boot
    ... I own an Abit BE-6 v1 mainboard with an on-board HPT366 controller. ... PIIX4: IDE controller at PCI slot 0000:00:07.1 ... HPT366: IDE controller at PCI slot 0000:00:13.0 ... setting IRQ 11 as level-triggered ...
    (Linux-Kernel)
  • Re: Suddenly wont recognize HD, w/ 1 exception !
    ... > controller. ... > be faster than what you have onboard (if PCI). ... I pulled the IDE cable off the working CD drive ... I pulled the IDE cable (EIDE 1) off the HD drive and put it on the CD ...
    (alt.sys.pc-clone.dell)
  • Re: SATA and PCI IDE card incompatable?
    ... onboard controller and the Promise controller. ... and the onboard IDE controller has CD and DVD drives ... I solved the problem by switching PCI slots to the only other one I have I ... swapped it with the PCI 550 Theatre TV/FM card. ...
    (microsoft.public.windowsxp.hardware)
Loading