Re: Unable to boot from a XPe NTFS CF

Right now, I'm using a Compact Flash. I'll check out these sites, and try to
contact the manufacture.

"KM" wrote:

Try this first: http://msdn2.microsoft.com/en-us/library/ms940177.aspx
Or this: http://msdn2.microsoft.com/en-us/embedded/aa731218.aspx

It is also possible that the BIOS on your device fails to properly enumerate USB bootable devices. You may want to check on the
motherboard manufacturer website whether they have new updates for the BIOS.
Also, try to use USBNTD.CHK - debug version of ntdetect.com - to see more detail info at the boot time while booting off USB device.
More info here: http://msdn2.microsoft.com/en-us/library/aa940877.aspx

--
=========
Regards,
KM

7B

"KM" wrote:

You got to BSOD - this is a good indication you at least made the CF bootable :-)

What was the BSOD number?

--
=========
Regards,
KM

Well, I tried the simple formating the CF with DOS and than ran bootprep. I
created the image to FAT and copied it to the CF ( simple copy). I placed it
into the ebox and I got the blue screen of death. " A problem has been
detected and windows has been shut down to prevent dmage to your computer"....

Thanks for trying to help
Brian.

"Sean Liming (eMVP)" wrote:


ufdprep.exe is only for USB flash keys. For CF cards, you should format with
DOS and then run bootprep.exe to change the boot sector from DOS to NT.

If you want an NTFS, you will need to format the card under Windows XP pro
using a IDE to CF adapater. A few can be found here:
http://www.seanliming.com/flashhelp.html. This assumes that the card is ID'd
as fixed and not removable.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit


"Briffee" <Briffee@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E4D3E014-AAD7-4AEA-AC28-29D3492D3FA5@xxxxxxxxxxxxxxxx
I have an ebox 3000 series mini-PC with an external CF IDE slot. It boots
up
fine with a CF formated with MS-DOS 6.22. That is how I got my TA.exe
file.
Once I built the XPe image, I tested it on my development station, and it
works fine. The only difference was in settings of the target hardware.

I used a simple copy of the image to the CF, no good. Everybody tells me
this is all I have to do. It sure isn't working for me.

I tried using the ufdprep.exe software provided by Microsoft, and then
copy
the image to the CF, no good. This however gave me the blue halt screen.
I
tried using the SDI2HD technique, and the image seems to successfully be
installed. At least, I can seem them. I tried checking the parition
after
the SDI2HD to make sure it was a NTFS partition and active. It was. This
technique just gave me a blinking cursor. So far, nothing I have done
seems
to work. Someone suggested checking the BOIS for changing a few fields.
However, the fields he suggested was not associated with the ebox.

For fun, I even tried building an image in FAT and FAT32. No good. I
even
tried using Fdisk /MBA to try fixing the partition, as well as using
Partition Magic 8.0 tools

I'm ready for any new ideas. This is the only thing stopping from
finishing
this project.

Any suggestions??????????????
Briffee









.

Relevant Pages

  • Re: Mounted phone memory card shows incorrect disk size.
    ... gparted said that there was no filesystem* on the card. ... seems to contain no partitions at all (not even a partition table if I ... FAT16 is the common format for removable solid-state ...
    (Ubuntu)
  • Re: Unable to boot from a XPe NTFS CF
    ... What was the BSOD number? ... you will need to format the card under Windows XP pro ... This assumes that the card is ID'd ... the SDI2HD to make sure it was a NTFS partition and active. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Unable to boot from a XPe NTFS CF
    ... you will need to format the card under Windows XP pro ... This assumes that the card is ID'd ... the SDI2HD to make sure it was a NTFS partition and active. ... I even tried building an image in FAT and FAT32. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Unable to boot from a XPe NTFS CF
    ... DOS and then run bootprep.exe to change the boot sector from DOS to NT. ... you will need to format the card under Windows XP pro ... This assumes that the card is ID'd ... the SDI2HD to make sure it was a NTFS partition and active. ...
    (microsoft.public.windowsxp.embedded)
  • Re: eXP Beginner: Problem booting from CF
    ... You delete all geometry things that were written by fdisk and format by using sdi2hd. ... > I have fdisked the Compact Flash card using DOS6.22, ...
    (microsoft.public.windowsxp.embedded)
Loading