Hardware analysis - SLD files already available

Hi,

When building an XPe image based on target's hardware analysis, is it
necessary/recommended to do the analysis with CPU, mermory, cooler etc
mounted on board or isn't this really required to build the OS?

I'm using "886LCD-M/FLEX" SBC by Kontron & the board's SLD-files are
already available on the manufacturer's site :
http://emea.kontron.com/index.php?id=226&cat=62&productid=531
As a consequence, I could directly start with the Target Designer tool
& this would save me some time.

However, as the CPU, DDR RAM etc. aren't standardly installed, maybe
it's a better idea to redo the hardware analysis with all these
components mounted on the board.


Thanks in advance

.

Relevant Pages

  • Re: Hardware analysis - SLD files already available
    ... necessary/recommended to do the analysis with CPU, mermory, cooler etc ... I could directly start with the Target Designer tool ... it's a better idea to redo the hardware analysis with all these ... So I just have to add the board's CPU driver to the configuration then ...
    (microsoft.public.windowsxp.embedded)
  • Re: Hardware analysis - SLD files already available
    ... The HAL/computer component is not going to change. ... XP Embedded Book Author - XP Embedded Advanced, ... When building an XPe image based on target's hardware analysis, ... However, as the CPU, DDR RAM etc. aren't standardly installed, maybe ...
    (microsoft.public.windowsxp.embedded)