Formatting difficulties



Hi, I have come across a compact flash which seems unable to boot XPe.
The SanDisk Extreme IV gives me "disk error" upon boot.

I have tried the following commands, as well as many variations..
these have worked for me with every other compact flash I have tested.
I am able to boot via USB using the USB 2.0 boot component. I have
also set the compact flash to fixed disk mode as well as the original
removable, neither with any success.

1. fdisk /mbr
fdisk (create, set active)
reboot
format D: /S
copy bootprep.exe D:
reboot, physically remove C:
bootprep /dC

2. XP CD (all of these many times!)
format C: with NTFS, quick
format C: with FAT, quick
format C: with NTFS
format C: with FAT

3. diskpart

4. the above fdisk method, then convert D: /FS:NTFS

I tried the previously mentioned method of copying over only boot.ini
and ntldr onto the compact flash. This gives me the same error. When I
remove ntldr, I get "ntldr is missing".

This leads me to come to the conclusion that this card either cannot
boot XPe, or I have a bad card. The problem is, the card can be
accessed on any of the OS without error. Has anybody else tried this
card? I am willing to try anything at this point..

.



Relevant Pages

  • Re: Unable to boot from a XPe NTFS CF
    ... I'm using a Compact Flash. ... you will need to format the card under Windows XP pro ... This assumes that the card is ID'd ... the SDI2HD to make sure it was a NTFS partition and active. ...
    (microsoft.public.windowsxp.embedded)
  • Re: CF formating and booting problems
    ... Formating a CF card in XP pro will not lay down the boot sector, ... Boot the system to DOS ... I format the CFand bootprep it ... "Sean Liming " wrote: ...
    (microsoft.public.windowsxp.embedded)
  • RE: bootable NTFS CF cards
    ... However is still fails to boot on the NTFS card. ... used XP pro cd to format the card on the target device. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Prepare HD for embedded
    ... The best way is to format the CF card under DOS. ... is in a CF to IDE adapter, boot the system to DOS and format the drive. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Compact Flash Boot Problem
    ... I'd recommend you to format the CF on the target PC under *DOS*. ... I have a System with XP Pro and XPe on a SATA drive. ... XP Embedded (Compact Flash) - NTFS ... When I disconnect my SATA drive I need to boot from my ...
    (microsoft.public.windowsxp.embedded)