Re: VGA problem??

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Charles,

Sounds like you are having display driver issue. What settings you set in TD for the display component you created? Make sure you
don't set the frequency too high.

Btw, what EWF mode do you use? If it is EWF RAM Reg (which is often the best choice for CF boot systems), then EWF partition size is
TD can be safely ignored - it won't impact anything at run time.

Also, if you want to know more about what's going on with your image. Check \windows\FBALog.txt on the target boot storage (you can
always copy and explore the file offline). Then you should see if and where it is failing. Perhaps, you may even be able to notice
display settings failures.

--
=========
Regards,
KM

I am new on XPe. I am working on the WinSystem EBC-855 board, boot from
CompactFlash which is Secondary Master. No floppy, CD-Rom, HD plugged in.

I leave the default Target Device settings from WinSystem as "Multi(0)
disk(0) rdsik(0)partition(1)" and other settings, only change the Boot
partition size from 975MB to 470MB( since I am using 512MB CompactFlash), and
the EWF settings->EWF partition size in Kbytes(481280KB==470MB), and build
the image.

During the First Boot, I can see on the display(CRT monitor) that all the
components installation and registration, then system reboot, display shows
"loading XP.." , my problem is, after that, the display only shows a
floating window with message 'Sync. out of range', if I change to another
Monitor, still show me ' no signal'.

I have Winsystem SBC component and WinSystem-Intel82855-Graphics Controller
component included.

Any component or configuration I missed?

P.S.

I am not positve that the system is still running or not , what I can see
from my power supply that the current still keep changing, and the keyboard
Cap LEd can be turned on and off, and also, after about 10minutes, the
display turn to completely black(looks like system idel mode) , if I hit
'Enter' key on keyboard, the floating window with message 'Sync: out of
range' comes back.

Any suggestion will be highly appreciated.

Charles Wang





.

Relevant Pages

  • Re: Defrag Probs and Lag Time
    ... etc. to set the IE settings correctly? ... Clicking on the entry for your hard drive should display the ... enter chkdsk C: ... look for an Information type entry ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: OT: HDTV Help(Fritz!!!), was "opinions"
    ... what settings my dashboards are set at and such and what gives me the ... Xboxallowed for progressive scan DVD playback...but you have ... There's no need to pay for "Monster" cables. ... to set the display at 480p, it should be available online possibly at ...
    (rec.games.video.sega)
  • Re: HELP! Dell told me I cannot watch tv on my tv AND work on com
    ... monitor or the only monitor. ... If your television is the only display connected to your computer and you do ... nView Display Settings option on the NVIDIA display menu, ... not see the TV Settings and the Screen Adjustment option on the NVIDIA ...
    (microsoft.public.windows.mediacenter)
  • Re: Windows Logon Screen Changed and classic style now shows....
    ... find something before resorting to a full format it is ... locked out of administration. ... an anomaly in your display. ... Could be caused by settings: ...
    (microsoft.public.windowsxp.accessibility)
  • TrunkPCR version 0.8.200 Now Available
    ... All of your active Control Channels will need to changed to P25, ... Control List display in CC activity when Afiliation ... Dual Receiver mode in Edacs. ... Edacs Dotting was set to Zero when Trunk Settings ...
    (rec.radio.scanner)