Re: Problem with pagefile during FBA

Tech-Archive recommends: Fix windows errors by optimizing your registry

Ricky,

Well, I suppose it is not an issue to set up pagefile before FBA (you will just have to manually set up corresponding registry
entries if TD doesn't do a good job there).
However, the real problem is that you can't enable the pagefile at run time, after FBA. Did I get this right?

A few things to check:

- Any chance your boot device (CF) is removable? Should be marked as fixed.

- Do you have enough space on the boot partition to create the pagefile? (please note: *boot* partition is the one where you
have ntldr on)

- Is the pagefile.sys getting actually created? (even if it is 0-sized)
What is the storage configuration (partitions) on your target?

- If you manually set the "PagingFiles" value of the [HKML\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
key, does it create pagefile on the next boot?

- Is "Primitive: Dbghelp" component in your Configuration?

- Do you have "Disk Dump Drivers" component included in the image config? (not directly related but may better have it in)

--
=========
Regards,
KM

I have a problem starting my configuration of XPe.
The FBA, during the "Processing runonce items" phase tells me that the
system is low on virtual memory. After that the FBA phase proceeds but when
I start the system the paging file is set to 0 (and, if I try to set it
manually through the system properties interface and reboot it remains to
0) and some components doesn't work.

My system has 128 MB RAM, I setted up paging files through "Standard PC"
components to 256-256 or 128-256 with no luck, I use a 1 GB CF card
(formatted to NTFS) without EWF as boot HD.

Anyone can help me, please?

Thanks a lot.

Ricky


.

Relevant Pages

  • Re: bootable CD for diskless systems (XPe)
    ... Have you created preFBA ELTO CD and inserted it during the FBA? ... Can you access ELTO CD files from XPE image when you boot from HDD? ... > 6- Then I ran FBA, after FBA was completed, windows embedded were loaded. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Minlogon RBS Depoloyment
    ... Depending on what you got on that machine (another disk you can boot off XP Pro or floppy you can boot off DOS) you have options to ... Remember this is the most basic minlogon I could make, ... >>> What you're saying is that a Minlogon SDI image using RBS has to run through ... >>> FBA on the target machine. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Builds That Support Multiple Configurations
    ... you do some tweak so that when you first boot on this other mobo. ... get fba to just re-run h/w detect? ... DOS and capture your "master" ghost image right? ...
    (microsoft.public.windowsxp.embedded)
  • Re: Run Items Without Explorer
    ... both will only processed during the first boot ... you must have the component "CMD - Windows Command Processor" ... adding another Run key because I am not running explorer as the shell. ... I was under the impression that in the abscence of explorer, the FBA ...
    (microsoft.public.windowsxp.embedded)
  • Re: Getting hostname at boot
    ... I never tried remote boot and to change SID at the same time. ... shutdown and make sdi file. ... > 12000 of the FBA on all the targets. ...
    (microsoft.public.windowsxp.embedded)