Re: FP 2007 HORM question
- From: "Mike Moini [MSFT]" <mikemoin@xxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 22 Nov 2006 09:43:46 -0800
Hello Lee,
I wrote a blog article on how to use the new APIs for HORM
(http://blogs.msdn.com/embedded/) but I doubt that would help you.
It seems that your problem is in restoration phase, when your PC is booting
from the hibernation file. If this were the case, then you could reproduce
the problem without the HORM and only with hibernation. To do that, disable
HORM (using the ewfmgr console commands or new APIs), hibernate the system
and then power back up.
Sometimes it is challenging to get hibernation to work on a system the first
time. One thing to look for is that all device drivers for the system are
present in your image. Sometimes the device driver for the video card or
audio in your system is not present in our componentized driver list. The
device will function, but could not hibernate nicely. You can check for the
health of your devices by looking under device manager. If this were the
case you have to get the device driver, componentize it, import to the
database and then add that to your configuration and build a new image.
There is a lot of good info about how to do this on the web. Here is a
tutorial on this subject:
http://msdn.microsoft.com/embedded/getstart/basics/tutorialsxpe/default.aspx
Regards,
Mike Moini
"Lee Laming" <Lee Laming@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C7A1D175-DCC0-44C0-BBE7-C345206A4076@xxxxxxxxxxxxxxxx
I have been using XP embedded now for a few months and have got a working
EWF
RAM (Reg) protected image created using the Feature Pack 2007 Enhanced
Write
Filter component. There is only one partition on the hard disk (C:). When
I
enable HORM in Target Designer and include Hibernation support and rebuild
everything works as expected until I hibernate the system. After
restartng,
the Resuming Windows screen appears and the progress bar increments until
it
reacheds the end. At this point, when I would expect it to go into the XP
OS
the computer just stops and stays stopped. I assume the HORM functionality
is
working as it always tries to reboot from the hibernation file. Only
restarting it and using F8 to go for a full system boot allows me to get
back
into XP. I have searched through the internet for help on this problem but
have so far drawn a blank. Has anyone experienced this using the Feature
Pack
2007 components? If anyone could help or point me to an article which
might
help me I would appreciate it a lot.
Thanks in advance
Lee Laming
.
- Follow-Ups:
- Re: FP 2007 HORM question
- From: Lee Laming
- Re: FP 2007 HORM question
- Prev by Date: Re: Security warning
- Next by Date: How to boot XPe SP1 from a USB flash drive?
- Previous by thread: Latest help files on the FP2007 Retail release
- Next by thread: Re: FP 2007 HORM question
- Index(es):
Relevant Pages
|
