Re: Hibernation without EWF

I am using the xpepm -hibernate. I am also running minlogon with a custom
shell.

"KM" wrote:

Tim,

If I may ask, how exactly you put the system in hibernation state?
What command or API you are using? (btw, what Shell you are running?)

Could you also try "\windows\fba\fba -hibernate" command? Does it fail or succedd?

--
=========
Regards,
KM


"Tim Hunter" <TimHunter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:33BC3F0C-2038-420E-AA1F-BFBFEBB99809@xxxxxxxxxxxxxxxx
adding the disk dump manager didn't work. Any other ideas?

thanks

"Tim Hunter" wrote:

Well here is my configuration. Advantech pcm9581 with all of the harddrives
from advantech.Also am using the ACPI Uniprocessor PC componet with the
hibernation enabled and set to Home/office Desk. My boot partition is 30gb
on a harddrive. I will be adding the disk dump componet today. Thanks for
the help

"Sean Liming (eMVP)" wrote:


You need to select the "enable hibernation" option in your Computer
Component (i.e. ACPI Uniprocessor, etc.) for hibernation to work. Also,
there needs to be enough empty space in the boot partition to support the
total amount of RAM in the system.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit


"Tim Hunter" <TimHunter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0BCAC01A-7D5C-415D-BE02-BB74394C13E4@xxxxxxxxxxxxxxxx
so I added the power managment application componet and I can't be my OS
to
create an hibernation file. I am using the Minlogon configuration. Any
thoughts?

Thanks,
Tim

"Oren Winter [MS]" wrote:

Tim,
EWF is needed only for HORM (Hibernate Once Resume Many) feature and not
for
"normal" hibernation operation. So yes, if all you need is the generic
hibernation support in the image you don't need to have EWF.
Thanks,
Oren

"Tim Hunter" <TimHunter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:8606E160-AB1C-49E4-ADEE-7998173F5BF3@xxxxxxxxxxxxxxxx
Is is possible to enable hiberantion without the EWF componet
installed?









.

Relevant Pages

  • Re: HORM
    ... In your simple shell, you could and a hot key that sends the system into hibernation. ... A test shows that if I boot my system to it's custom shell, then create the hibernation file. ... How do I create my Hibernation File while my shell is running, but before my shell fires off our application? ...
    (microsoft.public.windowsxp.embedded)
  • Re: Hibernation without EWF
    ... There is no hibernation tab on the power management componet. ... Use devcon tool of Microsoft (console version of Device Manager) to investigate. ... but no error when I run fba -hibernate from the command prompt. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Hibernation without EWF
    ... I will be adding the disk dump componet today. ... You need to select the "enable hibernation" option in your Computer ... Component (i.e. ACPI Uniprocessor, ...
    (microsoft.public.windowsxp.embedded)
  • Re: Hibernation without EWF
    ... how exactly you put the system in hibernation state? ... What command or API you are using? ... I will be adding the disk dump componet today. ... EWF is needed only for HORM feature and not ...
    (microsoft.public.windowsxp.embedded)
Loading