sdimgr and WinPE PnP conflict

Here is a weird issue:

I have a bootable WinPE 2005 disk with a SDI image of my embedded device.
I use SDIMGR.WSF to copy the XP Embedded image to the embedded device.

If the WinPE 2005 disk is booted with PnP detection disabled,
the SDI write is successful.

If the WinPE 2005 disk is booted with PnP detection enabled,
the the SDI write fails with the following error:
Error -2147467259 (0x80004005) in "SDIAUT.SDIFile.1": The device is not
ready.


To enable or disable PNP, set DoPNP=Yes or No in the winbom.ini file as
appropriate:
For example:
[WinPE.PNP]
DoPNP=No

Does anyone have any ideas?




.

Relevant Pages

  • Re: sdimgr and WinPE PnP conflict
    ... What worked was to use Windows XP SP2 as the basis of the WinPE ... To clarify, when creating a WinPE boot disk with the WinPE 2005 toolkit, ... I have a bootable WinPE 2005 disk with a SDI image of my embedded device. ...
    (microsoft.public.windowsxp.embedded)
  • Re: One more question
    ... the FBA ran, I ran fbreseal.exe When I saw the popup message asking me to ... Then I had sdimgr write the blob to the disk. ... > create the "gold" sdi file that you will deploy. ... >>> Another way that you can accomplish your goal is to create a partition ...
    (microsoft.public.windowsxp.embedded)
  • Re: SDI2HD- Additional Question From Orig Author
    ... Yes you are right about dos xcopy, ... Modify disk in sdi file creation procedures slightly and it should work. ...
    (microsoft.public.windowsxp.embedded)
  • "Error in newdev.dll" when using RAMDisk and Remote Boot Server
    ... Added the Windows RAM Disk Driver component to my configuration ... Copied the post-FBA image from my target system back into the SDI ... Set up Remote Boot Manager to properly serve the SDI image (for PXE ... and my XPe image boots and runs (so far so ...
    (microsoft.public.windowsxp.embedded)
  • Re: Windows PE Ram Boot SDI Image Error
    ... Please do not mix WinPE components with Windows XP Embedded Components. ... > SDI can be used for several scenarios. ... To remote boot a diskless XP ...
    (microsoft.public.windowsxp.embedded)