Re: XPE SP2 and Remote Desktop (Still)

If you go to the configuration UI for the 'Windows Firewall/Internet
Connection Sharing (ICS)' component you should find in the "Globally Open
Ports" section an entry for "Remote Desktop". Just make sure that is
enabled. For reference the port is TCP : 3389.

Cheers.

--
Nick Nehrhood
(Windows Embedded Group)


Embedded team blog: http://blogs.msdn.com/embedded/
---
This posting is provided "AS IS" with no warranties, and confers no rights.
"Josu Z." <josu@xxxxxxxxx> wrote in message
news:O09IJbryGHA.4548@xxxxxxxxxxxxxxxxxxxxxxx
hello i'm still having problemes with the renote desktop of my xpe image.
I want to have the remote desktop configured and running since the target
designer.

I have added: the Terminal Services macro component to my configuration
I have added: an user acount with administrator privileges.

But i am not able to connect to the xpe ( can`t connect to the remote
device...)

in the documentation it says:
"If your device requires Terminal Server functionality, be aware that the
component default is set to automatically allow server connections, but
only the Administrator group has access."
But witch component and where?

anyway i think it could be becouse of the windows firewall componet
(sp2 ).
Should i add any exe to the Authorized applications (i only have the
sessmgr.exe)

thnaksssssssssss



.

Relevant Pages

  • SP2 gigabit ethernet problems
    ... However I did find drivers at both XpeFiles ... When I build a configuration with either of these drivers the system ... "ipconfig" command shows 0.0.0.0 as the IP address for active ethernet ports. ...
    (microsoft.public.windowsxp.embedded)
  • Re: FreeBSD 6.0: Problem with network, doesnt use default gateway
    ... The problem you are having is more likely in the router you are using, but without that configuration info, it's impossible to tell. ... <ACPI PCI bus> on pcib0 ... 2 ports with 2 removable, ... configured irq 4 not in bitmap of probed irqs 0 ...
    (freebsd-questions)
  • Re: MicroVAX 3500 questions
    ... Behind the CPU panel there is a white battery attached to the PCB ... There are no cables going to these ports and there ... It's an inconvenience but the system will boot without it. ... Try SHO DEV or SHO ALL to list its hardware configuration. ...
    (comp.sys.dec)
  • Re: home network behind NAT and firewall ?
    ... > and then it's not all ports, just the specific ports that are necessary - ... proper classes and assign computers to classes. ... There are always tons of possible misconfigurations. ... But for normal proper configuration there is no difference: ...
    (comp.security.firewalls)
  • Re: Dynamic Stencil drawing based on Custom Properties?
    ... It allows you to have a variable number of connections. ... > is defined then an Visio add-in component will produce a configuration ... > flexibility in how many ports, lpars, logical devices,... ... > custom property. ...
    (microsoft.public.visio.developer)
Quantcast