Re: Problems Upgrading Image from SP1 to SP2

Yes, after much digging, and reading how to do away with the firewall, I
finally ran across an article about it being required, but if I copy a file
over (can't remember if off hand) then it all works.

I found that it is very important on my image to add automatic logon as
close to last as possible. If it and Administrator account are added
towards the beginning things do not work.

Numerous dependencies have been broken from SP1 and SP2 requiring one to add
several more components to get networking to work that the dependency check
did not find.

I have a working image, although it is 80 megs larger than my SP1 image, and
that is without adding the firewall. I have to do some serious digging to
find out where the extra bloat is.

What is about the norm people seen their image grow from SP1 to SP2?


Richard


"Andy Allred [MS]" <andyall@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:%23u5BcfktGHA.5044@xxxxxxxxxxxxxxxxxxxxxxx
I would recommend checking your symptoms after upgrading from SP1->SP2
first to determine whether it's FP specific or not. Autologon works in SP2
and in FP1, perhaps some advanced setting was lost?

For the sharing issue, I'm pretty sure (but may be wrong!) that the
release notes for SP2 mentioned the server service requires the Firewall
(part of the SP2 security work done in SP2 I believe). May be related to
the error you had when trying to share the drive?

--
Andy

Check out the Embedded team blog: http://blogs.msdn.com/embedded/

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Godzilla" <godzillaismad@xxxxxxxxx> wrote in message
news:1154495442.763998.63580@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi Richard,

Suprisingly the auto login still works after the SP2 upgrade...
likewise I had to upgrade the components within Target Designer via
Configuration -> Upgrade Component. After that I had to reload the
image from scratch, the problem i beforementioned went away...

I found your problem to be very strange... have you check your user
account component? Make sure there are two user accounts, one the
administrator and one a basic user...

Good luck...


richard wrote:
I performed an auto update in Target Designer, as well as starting from
scratch with my tap.pmq file. I normally use the TCPIP Networking with
File
Sharing Macro component, as well as terminal services and Remote
Desktop. I
know some of the dependencies changed in SP2 as well as FP2007.

The autologon has me baffled as well. Did the functionality of this
change?
When the login screen comes up and fails to login. There is no username
or
password in the login prompt. Before it had administrator for the
username.

Richard

"Godzilla" <godzillaismad@xxxxxxxxx> wrote in message
news:1154494133.518568.76870@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi Richard,

Have you upgrade your image component within Target Designer? The
component needs to be upgraded has an arrow beside its icon... i
experienced the same problem with the RAS manager not accepting phone
calls.

Hope it helps.



richard wrote:
I have a proven image from SP1 that I recently moved to SP2 and
FP2007 at
once. I even tried to create an image from scratch. I am not using
he
Cloning component and I have the Firewall turned off in SP2.

Several things not working....

Automatic Logon is no longer working for the administrator account.
Double
checked the settings in Administrator account and in Automatic Logon.

When I try to share a drive now, I get that the service is not
started,
do
you wish to start? Tell it yes and it fails with Error 102.

Remote Desktop is no longer Working.

I checked for the obvious components but evidently something is
different,
mostly Networking. I usually have about a dozen dependencies that I
do
not
resolve, such as dial up networking, but I even autoresolved with no
luck.

Thanks for any insight.

Richard






.

Relevant Pages

  • Re: sp2
    ... > since instaling sp2 i have started getting runtime errors on vid players ... If I was to give one personal reason for someone to upgrade to SP2, ... Why you should use a computer firewall.. ... You also have hardware on your machine that requires drivers to interface ...
    (microsoft.public.windowsxp.newusers)
  • Re: Worth the Upgrade to SP2?
    ... > firewall and a comparison with what you do now (in respect to those ... > two things) and what you will do after you patch with SP2... ... > If I was to give one personal reason for someone to upgrade to SP2, ... I have ordered the CD and will install. ...
    (microsoft.public.windowsxp.configuration_manage)
  • Re: xp home to xp professional
    ... never connect to the internet without the protection of a firewall and an Antivirus program. ... If you purchase the XP Pro Upgrade, be certain the box mentions having service pack 2. ... Once the upgrade package is fully setup, your pc would then be on PRO SP2. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Problems Upgrading Image from SP1 to SP2
    ... Suprisingly the auto login still works after the SP2 upgrade... ... Configuration -> Upgrade Component. ... Automatic Logon is no longer working for the administrator account. ...
    (microsoft.public.windowsxp.embedded)
  • Re: SP2 makes my computer talk to itself
    ... > I think I read somewhere that there is something in SP2 that is some kind ... since I have a router with hardware firewall AND ZA Pro that I ... Try one of the other free firewalls, or wait until they upgrade zonealarm ...
    (microsoft.public.windowsxp.help_and_support)