Re: Problem running FBA on exiting image using M-Sys uDoc


The boot time will be too long. The problem lies with the BIOS not
supporting USB 2.0 boot.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit


"Mark Kraft" <m@xxxxxxxxxx> wrote in message
news:eH7TXnMsGHA.4080@xxxxxxxxxxxxxxxxxxxxxxx
Hi Sean,


The USB is 1.1 color is green. I had some feeling about his. What will
boot
time be like compared to HDD using this on 1.1?

Thanks

Mark

"Sean Liming (eMVP)" <sean_liming@xxxxxxxxxxxx> wrote in message
news:uT7sDcMsGHA.4676@xxxxxxxxxxxxxxxxxxxxxxx

What color is the LED flashing? If green you have USB 1.1 boot and it
will
take some time to load. If orange, then you have USB 2.0 boot and there
is
something that is missing.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit


"Mark Kraft" <m@xxxxxxxxxx> wrote in message
news:%23gpQJaLsGHA.4140@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

I have a working image that we currently run on HDD.
I have recently acquired a sample of a USB uDoc from M-sys.

I have stepped thru the AP_DOC-1304 app note adding the USB uDiskOnChip
component to my existing image. I have rebuilt this and copied to the
partitioned device. I have not employed EWF and I am testing with a
single
partition. FBA starts only to the point where I see the bar across the
black
screen. It seems to stall here. The LED on the uDoc pulsing as if it is
doing something.



I am looking for suggestions as to what it might be doing or other
steps
I
need to take and may have missed.

Thank you

--
Mark Kraft
Design Engineer
Lehigh Electric Products Co.
Tel: 610-395-3386
Fax: 610-395-7735
email: mkraft@xxxxxxxxxxxxx
website: www.lehighdim.com








.

Relevant Pages

  • Re: freeze problem on normal boot
    ... It turns out that if I remove the graphics card sitting in the PCI-Express ... slot and use the onboard VGA, the system will boot repeatedly after the FBA. ... Re the USB mouse, I added in the MS USB Intellimouse coponent (maybe it ... "Sean Liming " wrote: ...
    (microsoft.public.windowsxp.embedded)
  • Re: soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem
    ... > What messages are you getting from boot log and dmesg? ... ACPI tables contain no PCI IRQ routing entries ... RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize ... USB Universal Host Controller Interface driver v2.2 ...
    (comp.os.linux.hardware)
  • Re: deployin XPe image to target
    ... I mostly use Remote Recover or USB boot disk. ... Sean Liming ... XP Embedded Book Author - XP Embedded Advanced, ...
    (microsoft.public.windowsxp.embedded)
  • Re: Naming harddisks (Linux)
    ... But I also see that for an USB drive it uses /dev/sdas the ... Does GRUB recognize SCSI drives? ... The first step in understanding the boot process is to ... The bootloader's job is to load the OSs kernel. ...
    (comp.os.linux.misc)
  • Re: UPDATE: El Torito Boot CD - USB CD-ROM
    ... There should be nothing preventing you from booting from USB CD-ROM as long ... Basically you have to make sure you included USB 2.0 boot component in your ... I can boot other CDs including Windows PE created CDs from the USB CD ROM ... What is different about running Windows XPE from a USB CDROM as opposed ...
    (microsoft.public.windowsxp.embedded)