Re: Problem running FBA on exiting image using M-Sys uDoc

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi Sean,


The USB is 1.1 color is green. I had some feeling about his. What will boot
time be like compared to HDD using this on 1.1?

Thanks

Mark

"Sean Liming (eMVP)" <sean_liming@xxxxxxxxxxxx> wrote in message
news:uT7sDcMsGHA.4676@xxxxxxxxxxxxxxxxxxxxxxx

What color is the LED flashing? If green you have USB 1.1 boot and it will
take some time to load. If orange, then you have USB 2.0 boot and there is
something that is missing.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit


"Mark Kraft" <m@xxxxxxxxxx> wrote in message
news:%23gpQJaLsGHA.4140@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

I have a working image that we currently run on HDD.
I have recently acquired a sample of a USB uDoc from M-sys.

I have stepped thru the AP_DOC-1304 app note adding the USB uDiskOnChip
component to my existing image. I have rebuilt this and copied to the
partitioned device. I have not employed EWF and I am testing with a
single
partition. FBA starts only to the point where I see the bar across the
black
screen. It seems to stall here. The LED on the uDoc pulsing as if it is
doing something.



I am looking for suggestions as to what it might be doing or other steps
I
need to take and may have missed.

Thank you

--
Mark Kraft
Design Engineer
Lehigh Electric Products Co.
Tel: 610-395-3386
Fax: 610-395-7735
email: mkraft@xxxxxxxxxxxxx
website: www.lehighdim.com






.

Relevant Pages

  • ~~~~~~~~~~~~~~ USB BOOT ~~~~~~~~~~~~~~
    ... boot external sata on usb ... usb boot disk download ... which usb drives will boot dell ...
    (sci.psychology.personality)
  • Re: USB hard drive docking station
    ... by using the USB hard drive docking station I might be able ... you're referring to a typical run-of-the-mill USB external enclosure? ... would be necessary merely to try to access the data on your problem HDD. ... Why can't you simply install that HDD as a secondary HDD in your PC, boot ...
    (microsoft.public.windowsxp.hardware)
  • Re: USB hard drive docking station
    ... by using the USB hard drive docking station I might be able ... you're referring to a typical run-of-the-mill USB external enclosure? ... would be necessary merely to try to access the data on your problem HDD. ... Why can't you simply install that HDD as a secondary HDD in your PC, boot ...
    (microsoft.public.windowsxp.hardware)
  • Re: soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem
    ... > What messages are you getting from boot log and dmesg? ... ACPI tables contain no PCI IRQ routing entries ... RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize ... USB Universal Host Controller Interface driver v2.2 ...
    (comp.os.linux.hardware)
  • Re: Boot from USB PRM (Partitioned Removable Media ) failed after loading OS2LVM.DMD error: "OS/2 i
    ... thanks for your comments and report of your usage of the USB boot and USB storage devices. ... least one case you can boot at least the R40, R51 and T43P Thinkpads here from USB Floppy Diskette devices. ... But if I want to get and instantly working rebuilt or built Thinkpad from this clone whole drive issue from DFSEE, it has to be done from a floppy diskette boot run unless one wants to boot to a command line for the rebuilt or built unit and do a complete CHKDSK on every partition post construction. ... So - you have a Thinkpad with attached USB Floppy Drive and an USB External HDD ...
    (comp.os.os2.bugs)