Re: SDImgr.wsf multi partitions


These would be seperate command lines. One for each partition. sdimgr
command uses drive letters so if these are D and E drivers than the command
would be:

sdimgr <SDIfile.sdi> /writepart:d: /yes
sdimgr <SDIfile.sdi> /writepart:e: /yes

Otherwise you can pull the Hard drive out. Connect it to a USB to IDE cable,
plug the USB into the development machine, and copy the image directly to
the drive.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit.

"Jason" <someone@xxxxxxxxxxxxx> wrote in message
news:OHHuZIDhGHA.1276@xxxxxxxxxxxxxxxxxxxxxxx
If I use diskpart to create 4 partitions on one physical drive, can I use
sdimgr.wsf to install my sdi file onto physical disk 1 partition 2,
physical disk 1 partition 3

Any ideas?



.

Relevant Pages

  • IDE HDD fail?
    ... This caused after this command: ... Device contains neither a valid DOS partition table, nor Sun, SGI or OSF ... Offline data collection status: ... Self-test execution status: ...
    (Linux-Kernel)
  • Re: Help with a little dd damage!
    ... Partition 3 has different physical/logical beginnings: ... Feb 28 20:20:57 morgansmachine kernel: EXT3-fs: write access will be enabled during recovery. ... So, fingers firmly crossed, have I managed to copy enough of my hard drive with the first two commands to be able to patch back the catastrophic damage I seem to have done with the last command. ... "By choosing not to ship any proprietary or binary drivers, Fedora does ...
    (Fedora)
  • Re: Trying to move /usr - Fixed
    ... After thinking about that mv command, ... Note /dev/ad8s1e is an empty partition (a new disk, ... I'll use user and usrdemo as the names of the ... the root of the file system. ...
    (freebsd-questions)
  • add disk/partition to softRaid5
    ... I am trying to add a partition to a 3 disk RAID5 device by using ... Command: Partition number: ... Old raid-disk 0 has 2132 chunks, ...
    (comp.os.linux.misc)
  • Re: HD-DOS+ Notes
    ... The F-P command expects high byte first and low byte last. ... No, if there are more than 16 characters in the filename, the normal ... the system partition and is arranged just like a directory on a disk ...
    (comp.sys.cbm)