Install any clone of XP direct to a USB stick
- From: "Dietmar" <dietmar.stoelting@xxxxxxxxxxx>
- Date: Sun, 05 Feb 2006 13:30:21 -0500
Windows XP boots from USB
Author: Dietmar Stölting, 31. Januar 2006
dietmar.stoelting@xxxxxxxxxxx
Germany
Tutorial (Version 4)
This Version of the Tutorial describes, how to install XPSP2 direct to an
USB harddisk.
All clones of XP work. Another harddisk can stay.
1.) Unzip the file F6 to a floppy disk.
2.) Put the XPSP2 CD, the floppy disk and the USB harddisk in.
3.) Press F6 when asked.
4.) Install OEM1...OEM5 with S (Z in Germany).
5.) Disable the pagefile.
6.) Delete on the USB harddisk in WINDOWS\inf usb.inf, usbstor.inf,
usbport.inf.
Good luck
Dietmar
EDIT 5. Februar 2006
Thanks to Jacopo Lazzari (jaclaz), now it is possible
to install all clones of XP direct to a USB stick.
Before you start with 1.) of the Tutorial 4 do the following:
1.) Write FF to all sectors of your USB stick with a hexeditor (I use
Winhex). Disconnect your stick.
2.) Install the Hitachi Microdrive Filter to your working XP harddisk.
3.) Connect your USB stick again.
4.) Go to the XP Device Manager, search for your USB stick (drives, next
to your harddisk).
5.) Chose New drivers for your USB stick and there Hitachi Microdrive.
6.) Format with Partition Magic 8 your USB stick with FAT32 and set it
activ.
7.) Go to step 1.) of Tutorial 4.
--------------------
Dietmar
Tutorial 3
Tutorial 4
www.WINUSB.de
.
- Follow-Ups:
- Re: Install any clone of XP direct to a USB stick
- From: alexnnr
- Re: Install any clone of XP direct to a USB stick
- Prev by Date: Re: EWF Help
- Next by Date: Re: EWF Help
- Previous by thread: RE: netsh probelm
- Next by thread: Re: Install any clone of XP direct to a USB stick
- Index(es):
Relevant Pages
|
