Re: 945 Chipset / ICH7

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Glad you fixed the INF.

Regarding the 7B you are missing a boot device driver (disk drive, PCI bus, IDE controller, IDE channels, or etc.)

http://msdn.microsoft.com/embedded/community/community/tips/xp/stoperr7b/default.aspx

=========
Regards,
KM


"Acke Ason" <AckeAson@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:9393ABD4-8828-4660-8AB1-77C4EF3533C3@xxxxxxxxxxxxxxxx
> Hi again,
>
> Thanks 4 the answer, ibelive that i found out what was "wrong" with the
> inf-files found this tread @ xpefiles
> http://www.xpefiles.com/viewtopic.php?t=313 and when i did the changes there
> i was able to import the files.
>
> But the sad part is that this didn't solve my blue screens "Stop 0x0000007B"
> (before the FBA window comes up) when booting so now i don't know if the
> chipset inf-files are the real problem for me or something else (Might be
> somthing with the IDE/SATA drivers maby)
>
> But tomorow i belive i'll try the solution in the answer before.
>
> Any Ideas if this might solve the blue screens?
>
> Thanks & Regards
> Acke Ason
>
>
>
> "KM" wrote:
>
>> Acke,
>>
>> Component Designer doesn't live along with some INF structures (it is obviously a bug since XP PnP can parse such files just
>> fine).
>>
>> Only cure for you would be to edit the file manually and correct it so that CD could parse it too.
>> Feel free to post the broken INF file here so that we could give it a try as well to help you.
>>
>> Another way for you to get some progress componentizing the chipset drivers could be in making simple component that will copy
>> driver files to appropriate windows directories on target (\windows\INF, \windows\system32, \windows\system32\drivers, etc.).
>> Then
>> during FBA XP (XPe) PnP will do the rest for you and install all PnP devices automatically. It any failures are there, you could
>> take a look at the setupapi.log file on your target device to see the reasons.
>>
>> =========
>> Regards,
>> KM
>>
>>
>> > Hi folks,
>> >
>> > Hope that all out there had nice X-mas holidays.
>> >
>> > I've having some problems with drivers/components for an Intel
>> > mobo with the 945 chipset (no probs exept the chipset drivers)
>> >
>> > I've downed the latest "infinst_autol.zip" from intel and when i try
>> > to make a component of the 945's & ICH7's INF's i'm getting the
>> > following error:
>> > <b>An error occurred while getting the vendors list section name.</b>
>> >
>> > I don't know if i'm doing some thing wrong...But i belive that some
>> > of u guys & girls here have a solution 4 this.
>> >
>> > Or if somedody has a already made component made of the latest
>> > Intel Chipset drivers (7.2.2.1006) and could put it up on www.xpefiles.com
>> > or some thing.
>> >
>> > Thanks & Regards
>> >
>> > Acke Ason
>> >
>> >
>> >
>> >
>>
>>
>>


.

Relevant Pages

  • Re: 945 Chipset / ICH7
    ... Now i have gone thru my components from my "imports" and i can not find ... All my boot device drivers (disk drive, PCI bus, IDE controller, IDE ... Thanks & Regards ...
    (microsoft.public.windowsxp.embedded)
  • Re: "Generic USB Input Device Support" for keydisks?
    ... include components by PnP IDs of drivers anylized on target device. ... What if the tool you are talking about just has to parse an INF file, ... >> component with all the files going to corresponding windows directories. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Required section not found in the INF
    ... I've looked through this entire thread, both here and using Google Groups search, and there is no further reply to me nor any mention of your interest in getting a zip file of it from me. ... Otherwise, use the .reg file contents I posted in my reply, to make the .reg file yourself, with Notepad. ... consistently run into this error message once I have installed the Canon drivers, which I have done multiple times in the past few days trying to get my printer working again. ... How can I tell if I have all the "sections" in "the INF?" ...
    (microsoft.public.windowsxp.general)
  • Re: "Generic USB Input Device Support" for keydisks?
    ... do on the XPe Tools side, changing components in XPe database will require ... components coming from INF imports of some drivers. ... > Your guess about importing inf files is correct. ...
    (microsoft.public.windowsxp.embedded)
  • Re: CSNW cannot work
    ... >> before booting your run-time image or running FBA. ... >> These .inf files are present in the Windows XP Embedded client main ... >> Regards, ...
    (microsoft.public.windowsxp.embedded)