Re: How to configure so that a CF is detected as Secondary or Primary MASTER IDE?


Heidi Linda a écrit :

> Gnurto wrote:
> > My objective is to install Win XPE in a CF that will be booted on a
> > device. But in order to do that, I need to configure so that the BIOS
> > of the the target device detect the CF as a MASTER (either it is
> > Primary or Secondary). My problem is that the BIOS of the device target
> > detect it as a Secondary SLAVE. I don't know how and where I should
> > configure that. I wanted to use atcfwchg to change something about it,
> > but each time I use it I receive the "fail (error #20)" error message.
> > I read somewhere that the program works when the CF is detected as a
> > MASTER, which is my objective from the beginning...
> >
> > To sum up everything, I think I have to configure somehow the CF to IDE
> > Adaptor in order to resolve my problem. I'm still searching for that,
> > but if someone can tell me some clues about that, it would be great
> > help.
> >
> Generally this will be down to a jumper setting on the CF itself, or on
> the adaptor...

Thanks for the tips... Now, I'm trying to find if some documentations
about my device tell something about this... I'm working on a PCM-9579
by the way... If someone know how to configure its SSD so that the CF
is detected as a MASTER on it, please inform me, it would be very nice
( sorry, it's not really a CF-IDE adaptator, it's included on the
card... I made a mistake describing my problem)...

.

Relevant Pages

  • Re: How to configure so that a CF is detected as Secondary or Primary MASTER IDE?
    ... But in order to do that, I need to configure so that the BIOS of the the target device detect the CF as a MASTER. ... It is probably the case that the way the board is set up, the cf socket is secondary slave and that's that. ...
    (microsoft.public.windowsxp.embedded)
  • How to configure so that a CF is detected as Secondary or Primary MASTER IDE?
    ... But in order to do that, I need to configure so that the BIOS ... of the the target device detect the CF as a MASTER (either it is ... detect it as a Secondary SLAVE. ... MASTER, which is my objective from the beginning... ...
    (microsoft.public.windowsxp.embedded)
  • Re: Repost: Drive jumpers - was: Boot Timeout?
    ... > I currently have a HDD as the primary master, a CDROM as the secondary ... > master and a HDD as the secondary slave on my FBSD box. ...
    (freebsd-questions)
  • Re: cd-rom drive
    ... shows there is a floppy drive, a hard drive being the primary master ... The cd-om drive is attached to the secondary slave so should be the ... connection location on a secondary IDE ribbon cable (end connector / middle ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: 2nd HD/old
    ... then connect the CD to Secondary slave. ... "mikebon" wrote in message ... >> Try installing it on the Secondary IDE channel as Master. ... >> etc. and all is well with the exception of it shows a total capacity of ...
    (microsoft.public.windowsxp.hardware)