Re: Runtime image build errors

Thanks David. actaully problem is i canot give the sharing permissions to
"repositories" directory. now it is successfully builded.

but it is not booted . the puter give the error

"Stop 0x000007B (0xF779ED63C , 0X C0000034, 0X0000000, 0X0000000)"

any idea?????

"David Harris" wrote:

> Ravi
>
> It sounds as though you have only included the one component (your hardware) in
> your configuration and then performed a dependency check. There are two main
> parts to any XPe configuration.
>
> 1) The hardware support (as provided by your My Device component).
> 2) The o/s support and application(s) to run on that hardware.
>
> If you do not include the needed components in both those categories then your
> o/s will not run.
>
> To demonstrate this try adding one of the 'Design Templates' to your
> configuration (e.g. Network Attached Storage). That will provide all the
> additional components needed to produce an o/s that will run on your hardware.
>
> David
>
>
> "ravi" <ravi@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:D93008CC-9695-47D9-A65A-476DF1953061@xxxxxxxxxxxxxxxx
> > Hi
> > i am new to embedded xp.i developed one runtime image. i follow the
> > following steps.
> >
> > 1. Using Component Designer i import .pmq file and prepared .sld file
> > 2.using Component DataManager imported .sld file into the database
> > 3.using Target analyzer i add my component (My Device).and build it.before
> > build i check depedencies it says that no errors.
> > then i try to build but it give 303 errors.
> >
> > some are ..
> >
> > Error 1109: Component: "ACPI Multiprocessor PC [Version 5.1.2600.1106,
> > R1507]" requires at least one additional enabled component not in the
> > configuration
> > Error 1109: Component: "ACPI Multiprocessor PC [Version 5.1.2600.1106,
> > R1507]" requires an additional enabled component not in the configuration
> >
> > and i tried to load this custom image but in boot time following error is
> > occurred
> >
> > "Windows could not start because the following is missing or corrupt
> > <Windows root> \system32\hal.dll
> > Please re-install a copy of the above file."
> >
> > please tell me how i resolve the build errors produced by target analyzer.
> >
> > thanks in advance
> > ravi
> >
> >
> >
> >
> >
>
>
>
.

Relevant Pages

  • Re: Runtime image build errors
    ... your configuration and then performed a dependency check. ... The hardware support. ... The o/s support and applicationto run on that hardware. ...
    (microsoft.public.windowsxp.embedded)
  • Re: ConfigParser shootout, preliminary entry
    ... David> relation between mapping and attributes. ... David> configuration some sort of dictionary or array. ... David> simple INI files. ... David> the modern age as an XML database. ...
    (comp.lang.python)
  • Re: Learning Code...Fast
    ... > Hi David, ... > embedded systems project, so there are a lot of magic numbers, memory ... If you can get the hardware diagrams or an explanation of the hardware ... They rely more on state transitions and ...
    (comp.programming)
  • Re: can 8 mm camcorder be used for filmmaking?
    ... > Waiving the right to remain silent, "David McCall" ... >> but that doesn't mean that the hardware doesn't matter. ... geting DV's video in and out is a lot easier, ...
    (rec.video.production)
  • Re: Hardware Worship Religion
    ... "David J Taylor" ... obsessed with the hardware than in the art of photography. ... and perhaps I blame scene ...
    (rec.photo.digital)