Re: Getmac reports ERROR Provider type not defined.
- From: "KM" <konstmor@xxxxxxxxxxxxxxxx>
- Date: Fri, 29 Jul 2005 11:41:17 -0700
MJ,
Do you know where and how it is failing now?
What error you are getting from netsh?
Do you use you customer script (batch, wsh?) to work with netsh? If so, can you show us the script?
Just in case you use "Local Area Network" interface name there, make sure to register the name first with command like:
rundll32 netshell.dll HrRenameConnection
--
Regards,
KM
> KM,
> I had an image where my netsh setup worked perfectly at the end of FBA. It
> had Winlogon (XP Explorer User Interface component) and Explorer Shell. I
> changed it to Minlogon and a Custom Shell, but now my static ip config
> doesn't work. I didn't have all of these components in my build before, so
> how did it work?
>
> Thanks!
> MJ
>
> "KM" wrote:
>
>> Make sure that you have the networking driver installed properly and running
>> fine. (use devcon or SetupApi.log)
>> Or you can use "snetcfg -v -s a" to list installed NICs.
>>
>> Also, make sure you've got the following components included:
>> Network Command Shell
>> Network Command Shell Interface Context
>> IP Router Monitor Library
>> Network Diagnostics
>> Remote Access Monitory
>> IP Security Services
>> Primitive: W32topl
>>
>>
>> KM
>>
>> > Btw, NETSH Command reports:
>> > WARNING: Could not obtain host information from machine XXXXX. Some
>> > commands
>> > may not be available. Provider type not defined.
>> >>netsh
>> >
>> > Exit command returns command line prompt.
>> > When I use netsh at a large build everything goes OK. There must be
>> > missing
>> > a Component (or Components), which one?
>> >
>> > V. Pohnetal
>> >
>> > "V. Pohnetal" wrote:
>> >
>> >> Well, the goal is to minimize Flash space for System.
>> >> I have made some large Builds that run OK on that HW. But now there is
>> >> only
>> >> one thing I need - to execute a program from Server. I tried to build
>> >> system
>> >> that consist from MinLogon, TCP/IP Networking, EWF and TCP/IP ARP only.
>> >> Getmac was included. When I want to get MAC addresse Getmac reports
>> >> ERROR
>> >> Provider type not defined.
>> >>
>> >> Vlastimil
>> >>
>> >> "KM" wrote:
>> >>
>> >> > Vlastimil,
>> >> >
>> >> > >I have Minlogon, TCP/IP Networking, EWF and TCP/IP ARP.
>> >> > > Need to enter static IP by ARP.
>> >> >
>> >> > Could you expand what you want to accomplish?
>> >> > If just fix the GetMac problems, please see below.
>> >> >
>> >> > > Any advice?
>> >> >
>> >> > Does the network driver got installed and working properly on your
>> >> > build?
>> >> >
>> >> > KM
>> >> >
>> >> >
>> >> >
>>
>>
>>
.
- Follow-Ups:
- References:
- Prev by Date: Re: BIOS Settings
- Next by Date: Missing msvbvm60.dll
- Previous by thread: Re: Getmac reports ERROR Provider type not defined.
- Next by thread: Re: Getmac reports ERROR Provider type not defined.
- Index(es):
Relevant Pages
|
